P0136 on a 2017 Chevrolet Silverado 1500

Post-Cat O2 Sensor Circuit Fault (Bank 1)

P0136 on a 2017 Chevrolet Silverado 1500 indicates post-cat o2 sensor circuit fault (bank 1). It usually stays drivable short-term but should be diagnosed promptly. The most common cause is failed bank 1 downstream o2 sensor (typically $150–$450). Confirm the root cause before replacing parts.

Severity: moderate Safe to drive (short term) Pickup Truck 2015-2019 Chevrolet Silverado 1500

Reviewed by MECH AI Editorial · Last verified · Includes 20 active NHTSA TSBs

What does P0136 mean on a 2017 Chevrolet Silverado 1500?

P0136 is set when the ECM detects a general circuit fault on the Bank 1 downstream (post-catalyst) oxygen sensor. Unlike the more specific P0137 (low voltage), P0138 (high voltage), or P0140 (no activity), P0136 is the generic circuit code that covers wiring issues, intermittent connection problems, or signals that go outside expected ranges in a way that doesn't fit a more specific fault category.

This guide covers P0136 across the 2015-2019 Chevrolet Silverado 1500 generation — the symptoms, causes, and diagnostic steps below apply to every model year from 2015 through 2019.

Is it safe to drive a 2017 Chevrolet Silverado 1500 with P0136?

In most cases a 2017 Chevrolet Silverado 1500 stays drivable for short trips with P0136 active, but diagnose and repair it promptly. This is a moderate-severity code — ignoring it can lead to further damage or a failed emissions test.

What are the symptoms of P0136 on a 2017 Chevrolet Silverado 1500?

What causes P0136 on a 2017 Chevrolet Silverado 1500?

Cause Likelihood Estimated repair (USD)
Failed Bank 1 downstream O2 sensor Most common $150–$450
Damaged sensor wiring (chafed against exhaust) Common $80–$350
Corroded O2 sensor connector Common $30–$200
Exhaust leak upstream of the downstream sensor Occasional $100–$500
Damaged or compressed sensor pigtail from a previous repair Occasional $80–$300
Failed PCM input (rare) Rare $400–$1,500

How to diagnose this on a 2017 Chevrolet Silverado 1500

  1. Read all O2-related codes to refine the picture

    P0136 alone is generic. With P0137 it points at low voltage specifically; with P0138 at high voltage; with P0140 at no activity at all; with P0141 at the heater. Cross-referencing tells you whether the diagnostic should target wiring, sensor element, or heater.

    Tools: Scan tool with full code retrieval

  2. Inspect the sensor wiring

    Trace the downstream sensor's harness from the sensor body back to the chassis connector. Look for melted insulation (from exhaust contact), chafing against suspension components, or rodent damage. Repair before replacing the sensor.

    Tools: Flashlight, Inspection mirror, Wire repair supplies

  3. Test the sensor connector

    Disconnect and inspect for water intrusion, corrosion, bent pins. Clean with electrical contact cleaner. The downstream connector sits under the vehicle and gets road spray; corrosion is common after a few salt-belt winters.

    Tools: Electrical contact cleaner, Magnifying glass

  4. Graph the sensor signal

    With engine warm and held at 2500 RPM, watch the Bank 1 downstream O2 voltage. A healthy sensor sits relatively steady around 0.6–0.8 V. Rapid switching, signal stuck at one value, or no signal at all confirms a sensor or wiring issue.

    Tools: Scan tool with graphing PIDs

  5. Verify the bias voltage from the PCM

    Disconnect the sensor and key on. The scan tool should still show bias voltage (typically 0.4–0.5 V) at the connector. If not present, the issue is between the connector and the PCM, not the sensor.

    Tools: Scan tool, Multimeter

Known Technical Service Bulletins for the 2015-2019 Chevrolet Silverado 1500

Manufacturers publish Technical Service Bulletins (TSBs) when a known issue affects a specific vehicle. These bulletins come from the NHTSA database for your Chevrolet Silverado 1500.

+14 more TSBs available in MECH AI's TSB explorer for this vehicle.

NHTSA complaints & recalls for the 2017 Chevrolet Silverado 1500

Owner-reported safety complaints and official recalls filed with the U.S. National Highway Traffic Safety Administration for the 2017 Chevrolet Silverado 1500. Use these to gauge how common a problem is on your specific vehicle before you start chasing Chevrolet Silverado 1500 diagnostics.

831 owner complaints
49 involved a crash
15 involved a fire
21 reported injuries
  • POWER TRAIN 220
  • ENGINE 128
  • SERVICE BRAKES 221
  • ELECTRICAL SYSTEM 132
  • UNKNOWN OR OTHER 88

6 active recalls

  • SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM Sep 2019

    General Motors LLC (GM) is recalling certain 2015-2017 Cadillac Escalade, 2014-2018 Chevrolet Silverado, GMC Sierra, 2015-2018 Chevrolet Suburban, Tahoe, GMC Yukon vehicles. The amount of vacuum created by the vacuum pump may decrease over time.…

    NHTSA campaign 19V645000
  • SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:WHEEL SPEED SENSOR/TONE RING Oct 2019

    General Motors LLC (GM) is recalling certain 2015-2020 Chevrolet Suburban, Tahoe, and GMC Yukon, and 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles equipped with a 5.3-liter engine, a 3.08-ratio rear axle and four-wheel drive. If a wheel-speed sensor fails, whil…

    NHTSA campaign 19V761000
  • AIR BAGS:FRONTAL Sep 2016

    General Motors LLC (GM) is recalling certain model year 2015-2017 Chevrolet Silverado 2500 HD, 3500 HD, Tahoe, Suburban, GMC Sierra 2500 HD and 3500 HD, GMC Yukon, GMC Yukon XL, Cadillac Escalade and Cadillac Escalade ESV vehicles and 2014-2017 Chevrolet Corvette, Silverado 1500…

    NHTSA campaign 16V651000
  • CHILD SEAT:TETHER: CONNECTOR/CLIP Aug 2017

    General Motors LLC (GM) is recalling certain 2017 Chevrolet Silverado 1500, and GMC Sierra 1500 trucks. The owner's manual for the affected vehicles may be missing instructions on how to use the tether anchorage and child restraint anchorage systems. As such, these vehicles fai…

    NHTSA campaign 17V487000

How do I fix P0136 on a 2017 Chevrolet Silverado 1500?

About the 2015-2019 Chevrolet Silverado 1500

The 2015-2019 Chevrolet Silverado 1500 was commonly sold with the following powertrains: 5.3L V8, 6.2L V8, 2.7L Turbo I4. Common trims include WT, LT, RST, LTZ, High Country.

Why P0136 is the catch-all post-cat code

Each O2 sensor has a family of possible codes:

CodeMeaning
P0136Generic circuit issue (catch-all)
P0137Voltage too low (open or short to ground)
P0138Voltage too high (short to power or rich condition)
P0140No activity detected (sensor isn’t reporting anything)
P0141Heater circuit fault

When the ECM detects a problem that doesn’t fit the more specific patterns, it falls back to P0136. Reading other codes alongside narrows the diagnosis significantly — P0136 alone is much harder to pin down than P0136 + P0140.

What “downstream sensor” actually monitors

The Bank 1 downstream sensor is mounted in the exhaust after the catalytic converter on Bank 1 (the cylinder bank containing cylinder #1). Its main job is catalyst monitoring — comparing its signal to the upstream sensor’s signal to determine whether the catalyst is still scrubbing exhaust gases.

It provides a secondary, slower fuel-trim correction layer on top of upstream-sensor closed-loop control, but it is not the primary fuel feedback. A bad downstream sensor primarily affects emissions monitoring rather than drivability.

OEM vs aftermarket sensors

The downstream sensor’s role is comparison, not raw measurement, so it is slightly less picky about sensor response curve than the upstream. But aftermarket sensors still produce inconsistent results; for $30 more, an OEM Bosch, Denso, or NTK sensor is worth it on a vehicle you plan to keep.

P0136 on a 2017 Chevrolet Silverado 1500: frequently asked questions

What does diagnostic trouble code P0136 mean on a 2017 Chevrolet Silverado 1500?

P0136 is set when the ECM detects a general circuit fault on the Bank 1 downstream (post-catalyst) oxygen sensor. Unlike the more specific P0137 (low voltage), P0138 (high voltage), or P0140 (no activity), P0136 is the generic circuit code that covers wiring issues, intermittent connection problems, or signals that go outside expected ranges in a way that doesn't fit a more specific fault category.

What are the symptoms of P0136 on a 2017 Chevrolet Silverado 1500?

Check Engine Light is illuminated. Catalyst readiness monitor will not complete. Possible slight reduction in fuel economy. Often no drivability symptoms. Vehicle will fail emissions / smog testing

What causes P0136 on a 2017 Chevrolet Silverado 1500?

Failed Bank 1 downstream O2 sensor (most-common). Damaged sensor wiring (chafed against exhaust) (common). Corroded O2 sensor connector (common). Exhaust leak upstream of the downstream sensor (occasional). Damaged or compressed sensor pigtail from a previous repair (occasional). Failed PCM input (rare) (rare)

Is it safe to drive a 2017 Chevrolet Silverado 1500 with P0136?

In most cases a 2017 Chevrolet Silverado 1500 stays drivable for short trips with P0136 active, but it should be diagnosed and repaired promptly — this is a moderate-severity code. Ignoring it can lead to further damage or a failed emissions test.

Related diagnostic codes

P0136 on other Chevrolet Silverado 1500 model years