P0136 on a 2022 Chevrolet Silverado 1500

Post-Cat O2 Sensor Circuit Fault (Bank 1)

P0136 on a 2022 Chevrolet Silverado 1500 indicates post-cat o2 sensor circuit fault (bank 1). It usually stays drivable short-term but should be diagnosed promptly. The most common cause is failed bank 1 downstream o2 sensor (typically $150–$450). Confirm the root cause before replacing parts.

Severity: moderate Safe to drive (short term) Pickup Truck 2020-2024 Chevrolet Silverado 1500

Reviewed by MECH AI Editorial · Last verified

What does P0136 mean on a 2022 Chevrolet Silverado 1500?

P0136 is set when the ECM detects a general circuit fault on the Bank 1 downstream (post-catalyst) oxygen sensor. Unlike the more specific P0137 (low voltage), P0138 (high voltage), or P0140 (no activity), P0136 is the generic circuit code that covers wiring issues, intermittent connection problems, or signals that go outside expected ranges in a way that doesn't fit a more specific fault category.

This guide covers P0136 across the 2020-2024 Chevrolet Silverado 1500 generation — the symptoms, causes, and diagnostic steps below apply to every model year from 2020 through 2024.

Is it safe to drive a 2022 Chevrolet Silverado 1500 with P0136?

In most cases a 2022 Chevrolet Silverado 1500 stays drivable for short trips with P0136 active, but diagnose and repair it promptly. This is a moderate-severity code — ignoring it can lead to further damage or a failed emissions test.

What are the symptoms of P0136 on a 2022 Chevrolet Silverado 1500?

What causes P0136 on a 2022 Chevrolet Silverado 1500?

Cause Likelihood Estimated repair (USD)
Failed Bank 1 downstream O2 sensor Most common $150–$450
Damaged sensor wiring (chafed against exhaust) Common $80–$350
Corroded O2 sensor connector Common $30–$200
Exhaust leak upstream of the downstream sensor Occasional $100–$500
Damaged or compressed sensor pigtail from a previous repair Occasional $80–$300
Failed PCM input (rare) Rare $400–$1,500

How to diagnose this on a 2022 Chevrolet Silverado 1500

  1. Read all O2-related codes to refine the picture

    P0136 alone is generic. With P0137 it points at low voltage specifically; with P0138 at high voltage; with P0140 at no activity at all; with P0141 at the heater. Cross-referencing tells you whether the diagnostic should target wiring, sensor element, or heater.

    Tools: Scan tool with full code retrieval

  2. Inspect the sensor wiring

    Trace the downstream sensor's harness from the sensor body back to the chassis connector. Look for melted insulation (from exhaust contact), chafing against suspension components, or rodent damage. Repair before replacing the sensor.

    Tools: Flashlight, Inspection mirror, Wire repair supplies

  3. Test the sensor connector

    Disconnect and inspect for water intrusion, corrosion, bent pins. Clean with electrical contact cleaner. The downstream connector sits under the vehicle and gets road spray; corrosion is common after a few salt-belt winters.

    Tools: Electrical contact cleaner, Magnifying glass

  4. Graph the sensor signal

    With engine warm and held at 2500 RPM, watch the Bank 1 downstream O2 voltage. A healthy sensor sits relatively steady around 0.6–0.8 V. Rapid switching, signal stuck at one value, or no signal at all confirms a sensor or wiring issue.

    Tools: Scan tool with graphing PIDs

  5. Verify the bias voltage from the PCM

    Disconnect the sensor and key on. The scan tool should still show bias voltage (typically 0.4–0.5 V) at the connector. If not present, the issue is between the connector and the PCM, not the sensor.

    Tools: Scan tool, Multimeter

NHTSA complaints & recalls for the 2022 Chevrolet Silverado 1500

Owner-reported safety complaints and official recalls filed with the U.S. National Highway Traffic Safety Administration for the 2022 Chevrolet Silverado 1500. Use these to gauge how common a problem is on your specific vehicle before you start chasing Chevrolet Silverado 1500 diagnostics.

536 owner complaints
9 involved a crash
5 involved a fire
14 reported injuries
  • ENGINE 204
  • POWER TRAIN 145
  • ELECTRICAL SYSTEM 120
  • UNKNOWN OR OTHER 55
  • SERVICE BRAKES 54

6 active recalls

  • EXTERIOR LIGHTING:BRAKE LIGHTS Jun 2022

    General Motors (GM) has decided that certain 2022 model year Chevrolet Silverado, and GMC Sierra vehicles equipped with an accessory sport bar. The accessory sport bar contains a high-mounted brake light that may not function. In addition, it may block the vehicle's existing hi…

    NHTSA campaign 22V463000
  • AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE Nov 2022

    General Motors, LLC (GM) is recalling certain 2022 Chevrolet Silverado 1500 vehicles. The sensing diagnostic module (SDM) was left in manufacturing mode and not activated at the assembly plant prior to shipment. As such, these vehicles fail to comply with the requirements of Fe…

    NHTSA campaign 22V873000
  • EXTERIOR LIGHTING:LIGHTING CONTROL MODULE:SOFTWARE Dec 2022

    General Motors, LLC (GM) is recalling certain 2020-2023 Cadillac CT4 and CT5; 2021-2023 Buick Envision; and 2022-2023 Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles. The daytime running lights (DRLs) m…

    NHTSA campaign 22V903000
  • POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE Oct 2024

    General Motors, LLC (GM) is recalling certain 2020-2022 Chevrolet Silverado 1500, 2500, 3500, GMC Sierra 1500, 2500, 3500, 2021 Cadillac Escalade, Escalade ESV, Chevrolet Tahoe, Suburban, GMC Yukon, and Yukon XL vehicles equipped with diesel engines. The transmission control val…

    NHTSA campaign 24V797000

How do I fix P0136 on a 2022 Chevrolet Silverado 1500?

About the 2020-2024 Chevrolet Silverado 1500

The 2020-2024 Chevrolet Silverado 1500 was commonly sold with the following powertrains: 5.3L V8, 6.2L V8, 2.7L Turbo I4. Common trims include WT, LT, RST, LTZ, High Country.

Why P0136 is the catch-all post-cat code

Each O2 sensor has a family of possible codes:

CodeMeaning
P0136Generic circuit issue (catch-all)
P0137Voltage too low (open or short to ground)
P0138Voltage too high (short to power or rich condition)
P0140No activity detected (sensor isn’t reporting anything)
P0141Heater circuit fault

When the ECM detects a problem that doesn’t fit the more specific patterns, it falls back to P0136. Reading other codes alongside narrows the diagnosis significantly — P0136 alone is much harder to pin down than P0136 + P0140.

What “downstream sensor” actually monitors

The Bank 1 downstream sensor is mounted in the exhaust after the catalytic converter on Bank 1 (the cylinder bank containing cylinder #1). Its main job is catalyst monitoring — comparing its signal to the upstream sensor’s signal to determine whether the catalyst is still scrubbing exhaust gases.

It provides a secondary, slower fuel-trim correction layer on top of upstream-sensor closed-loop control, but it is not the primary fuel feedback. A bad downstream sensor primarily affects emissions monitoring rather than drivability.

OEM vs aftermarket sensors

The downstream sensor’s role is comparison, not raw measurement, so it is slightly less picky about sensor response curve than the upstream. But aftermarket sensors still produce inconsistent results; for $30 more, an OEM Bosch, Denso, or NTK sensor is worth it on a vehicle you plan to keep.

P0136 on a 2022 Chevrolet Silverado 1500: frequently asked questions

What does diagnostic trouble code P0136 mean on a 2022 Chevrolet Silverado 1500?

P0136 is set when the ECM detects a general circuit fault on the Bank 1 downstream (post-catalyst) oxygen sensor. Unlike the more specific P0137 (low voltage), P0138 (high voltage), or P0140 (no activity), P0136 is the generic circuit code that covers wiring issues, intermittent connection problems, or signals that go outside expected ranges in a way that doesn't fit a more specific fault category.

What are the symptoms of P0136 on a 2022 Chevrolet Silverado 1500?

Check Engine Light is illuminated. Catalyst readiness monitor will not complete. Possible slight reduction in fuel economy. Often no drivability symptoms. Vehicle will fail emissions / smog testing

What causes P0136 on a 2022 Chevrolet Silverado 1500?

Failed Bank 1 downstream O2 sensor (most-common). Damaged sensor wiring (chafed against exhaust) (common). Corroded O2 sensor connector (common). Exhaust leak upstream of the downstream sensor (occasional). Damaged or compressed sensor pigtail from a previous repair (occasional). Failed PCM input (rare) (rare)

Is it safe to drive a 2022 Chevrolet Silverado 1500 with P0136?

In most cases a 2022 Chevrolet Silverado 1500 stays drivable for short trips with P0136 active, but it should be diagnosed and repaired promptly — this is a moderate-severity code. Ignoring it can lead to further damage or a failed emissions test.

Related diagnostic codes

P0136 on other Chevrolet Silverado 1500 model years