P0750 on a 2022 Ram 1500

Shift Solenoid A Malfunction

P0750 on a 2022 Ram 1500 indicates shift solenoid a malfunction. It usually stays drivable short-term but should be diagnosed promptly. The most common cause is failed shift solenoid a (electrical or mechanical) (typically $250–$900). Confirm the root cause before replacing parts.

Severity: high Safe to drive (short term) Pickup Truck 2020-2024 Ram 1500

Reviewed by MECH AI Editorial · Last verified

What does P0750 mean on a 2022 Ram 1500?

P0750 is set when the TCM detects that shift solenoid A is not responding to commands — either the circuit is electrically open or shorted, or the solenoid is mechanically stuck. Shift solenoid A controls one of the hydraulic shift paths inside the valve body; depending on the transmission, "A" may control specific shifts (1-2 or 2-3) or be paired with another solenoid for upshift logic. Without a working solenoid A, the transmission cannot make those shifts and typically enters limp mode.

This guide covers P0750 across the 2020-2024 Ram 1500 generation — the symptoms, causes, and diagnostic steps below apply to every model year from 2020 through 2024.

Is it safe to drive a 2022 Ram 1500 with P0750?

In most cases a 2022 Ram 1500 stays drivable for short trips with P0750 active, but diagnose and repair it promptly. This is a high-severity code — ignoring it can lead to further damage or a failed emissions test.

What are the symptoms of P0750 on a 2022 Ram 1500?

What causes P0750 on a 2022 Ram 1500?

Cause Likelihood Estimated repair (USD)
Failed shift solenoid A (electrical or mechanical) Most common $250–$900
Damaged solenoid wiring or external transmission connector Common $100–$500
Contaminated transmission fluid causing valve sticking Common $150–$500
Worn or stuck valve body causing the solenoid to lose pressure regulation Occasional $600–$2,000
Failed TCM driver for the solenoid circuit Rare $500–$1,500
Internal transmission damage (rare for P0750 alone) Rare $2,500–$6,500

How to diagnose this on a 2022 Ram 1500

  1. Check fluid level and condition

    Always start a transmission diagnosis with fluid. Most modern transmissions require a specific procedure to check level — typically warm, level surface, engine running, selector in park. Burnt-smelling or dark fluid means clutch material in circulation; fix the underlying issue, not just the solenoid.

    Tools: Vehicle-specific service procedure, Replacement fluid if needed

  2. Pull all transmission codes from the TCM

    P0750 alone is one repair scope. P0750 with P0731-P0734 (ratio incorrect) or P0741 (TCC stuck off) means broader transmission issues that may not resolve with a solenoid replacement alone.

    Tools: Scan tool with TCM access

  3. Test shift solenoid A electrically

    Disconnect the external transmission connector. Find the solenoid A pin in the wiring diagram and measure resistance — typically 10–30 Ω. Infinite or near-zero means a failed solenoid. Confirm the TCM is commanding voltage during a shift attempt by back-probing while driving.

    Tools: Multimeter, Wiring diagram, Back-probe pins

  4. Inspect the connector for fluid contamination

    A failing case seal allows transmission fluid to wick up the external wiring harness, contaminating the connector. Look for fluid inside the connector or up the harness. If found, repair the seal AND likely replace the contaminated harness section — fluid in the connector creates intermittent faults that can mimic solenoid failure.

    Tools: Connector unlock tool, Flashlight

  5. Drop the pan and inspect for clutch material

    Brown or gritty paste on the pan magnet indicates clutch slippage somewhere in the transmission. If the solenoid is bad, that's one repair; if the pan also shows clutch material, the transmission has bigger problems and a solenoid replacement is just a stopgap.

    Tools: Drain pan, New filter and gasket, Common hand tools

NHTSA complaints & recalls for the 2022 Ram 1500

Owner-reported safety complaints and official recalls filed with the U.S. National Highway Traffic Safety Administration for the 2022 Ram 1500. Use these to gauge how common a problem is on your specific vehicle before you start chasing Ram 1500 diagnostics.

15 active recalls

  • VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:WINDSHIELD:ELECTRICAL HEATING ELEMENT Nov 2021

    Chrysler (FCA US, LLC) is recalling certain 2022 Ram 1500 vehicles. These vehicles may have been built with incompatible heating, ventilation, and air conditioning systems (HVAC), resulting in the windshield defrosting and defogging system being inoperable to drivers. As such,…

    NHTSA campaign 21V871000
  • BACK OVER PREVENTION:DISPLAY FUNCTION Jun 2022

    Chrysler (FCA US, LLC) is recalling certain 2022 Ram 1500, 2500 pickup trucks, and 3500 Cab Chassis vehicles with GVWR less than 10,000 lbs. The radio software may prevent the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federa…

    NHTSA campaign 22V407000
  • SEAT BELTS:PRETENSIONER Oct 2022

    Chrysler (FCA US, LLC) is recalling certain 2022 Ram 1500, Jeep Gladiator, and 2021 Jeep Wrangler vehicles. The front seat belt retractors may have an improperly welded micro gas generator, which can result in seat belt pretensioner failure.…

    NHTSA campaign 22V766000
  • FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP Oct 2022

    Chrysler (FCA US, LLC) is recalling certain 2020-2022 Jeep Wrangler, Ram 1500, and 2021-2022 Jeep Gladiator vehicles equipped with 3.0L diesel engines. The high pressure fuel pump (HPFP) may fail, causing an engine stall.…

    NHTSA campaign 22V767000

How do I fix P0750 on a 2022 Ram 1500?

About the 2020-2024 Ram 1500

The 2020-2024 Ram 1500 was commonly sold with the following powertrains: 5.7L HEMI V8, 3.6L V6, 3.0L EcoDiesel V6. Common trims include Tradesman, Big Horn, Laramie, Rebel, Limited.

What “solenoid A” actually does depends on the transmission

Different transmissions use different shift logic, so “shift solenoid A” controls different specific shifts:

The repair manual for the specific transmission will identify which shift A controls. The symptom set varies accordingly — some P0750 conditions strand the vehicle, others just produce harsh or skipped shifts.

Solenoid pack vs individual solenoid replacement

Modern transmissions group all shift solenoids into a single “solenoid pack” that bolts to the valve body. Replacing all solenoids at once (as a pack) is often the same labor as one solenoid alone — and prevents the other solenoids from failing shortly after as the pack ages out together. For high-mileage transmissions, pack replacement is the more economical choice.

When the solenoid is fine but P0750 still sets

Two non-obvious causes that can fool a parts-swap repair:

P0750 on a 2022 Ram 1500: frequently asked questions

What does diagnostic trouble code P0750 mean on a 2022 Ram 1500?

P0750 is set when the TCM detects that shift solenoid A is not responding to commands — either the circuit is electrically open or shorted, or the solenoid is mechanically stuck. Shift solenoid A controls one of the hydraulic shift paths inside the valve body; depending on the transmission, "A" may control specific shifts (1-2 or 2-3) or be paired with another solenoid for upshift logic. Without a working solenoid A, the transmission cannot make those shifts and typically enters limp mode.

What are the symptoms of P0750 on a 2022 Ram 1500?

Check Engine Light is illuminated. Transmission stuck in a single gear or limited gear range. Hard, harsh, or absent upshifts. Possible no movement in drive (if solenoid is critical to initial gear engagement). Engine RPM unusually high at cruise (no upshift completing). Reduced fuel economy. Often paired with P0700 (transmission control malfunction)

What causes P0750 on a 2022 Ram 1500?

Failed shift solenoid A (electrical or mechanical) (most-common). Damaged solenoid wiring or external transmission connector (common). Contaminated transmission fluid causing valve sticking (common). Worn or stuck valve body causing the solenoid to lose pressure regulation (occasional). Failed TCM driver for the solenoid circuit (rare). Internal transmission damage (rare for P0750 alone) (rare)

Is it safe to drive a 2022 Ram 1500 with P0750?

In most cases a 2022 Ram 1500 stays drivable for short trips with P0750 active, but it should be diagnosed and repaired promptly — this is a high-severity code. Ignoring it can lead to further damage or a failed emissions test.

Related diagnostic codes

P0750 on other Ram 1500 model years