P0133 on a 2022 Honda Pilot

O2 Sensor Slow Response (Bank 1 Upstream)

P0133 on a 2022 Honda Pilot indicates o2 sensor slow response (bank 1 upstream). It usually stays drivable short-term but should be diagnosed promptly. The most common cause is aged or contaminated bank 1 upstream o2 sensor (typically $150–$450). Confirm the root cause before replacing parts.

Severity: moderate Safe to drive (short term) Mid-size SUV 2020-2024 Honda Pilot

Reviewed by MECH AI Editorial · Last verified

What does P0133 mean on a 2022 Honda Pilot?

P0133 is set when the upstream oxygen sensor on Bank 1 takes longer than the calibrated maximum to switch between rich and lean readings during normal closed-loop operation. A healthy upstream O2 sensor switches several times per second at 2500 RPM. A "lazy" sensor switches slowly, which prevents the ECM from making fast fuel adjustments — degrading drivability and emissions.

This guide covers P0133 across the 2020-2024 Honda Pilot generation — the symptoms, causes, and diagnostic steps below apply to every model year from 2020 through 2024.

Is it safe to drive a 2022 Honda Pilot with P0133?

In most cases a 2022 Honda Pilot stays drivable for short trips with P0133 active, but diagnose and repair it promptly. This is a moderate-severity code — ignoring it can lead to further damage or a failed emissions test.

What are the symptoms of P0133 on a 2022 Honda Pilot?

What causes P0133 on a 2022 Honda Pilot?

Cause Likelihood Estimated repair (USD)
Aged or contaminated Bank 1 upstream O2 sensor Most common after 80–120k miles or after silicone-contamination events. Most common $150–$450
Silicone contamination from RTV sealant or anti-freeze leak Silicone glazes the sensor element and slows it permanently. Common $150–$600
Lead-poisoned sensor (rare — leaded fuel exposure) Rare $150–$450
Failing sensor heater extending warm-up time Occasional $150–$450
Exhaust leak upstream causing the sensor to read inconsistently Occasional $100–$500
Aftermarket O2 sensor with wrong response curve Occasional $150–$450

How to diagnose this on a 2022 Honda Pilot

  1. Graph the upstream O2 sensor signal

    With the engine fully warm and held at 2500 RPM, graph the Bank 1 upstream O2 voltage. A healthy sensor switches between approximately 0.1 V and 0.9 V at least 5 times in 10 seconds. A slow sensor switches 2–3 times — or worse, fewer. Compare to the Bank 2 sensor (if equipped) to confirm one is slow.

    Tools: Scan tool with O2 voltage graphing

  2. Check for exhaust leaks ahead of the sensor

    Cold-start the engine and listen along the exhaust manifold and gaskets. A small upstream leak admits fresh air that causes the sensor to read inconsistently and lazily.

    Tools: Mechanic's stethoscope, Flashlight

  3. Inspect the sensor for contamination

    Remove the sensor and visually inspect the tip: - Black soot — rich-running condition (fix the underlying cause first) - White or chalky coating — silicone contamination (sensor is finished) - Brown or oily film — oil consumption issue (engine work needed) - Green — coolant in the exhaust (head gasket or intake leak) Contamination is permanent for the sensor — replace it AND fix the underlying cause.

    Tools: Oxygen sensor socket, Anti-seize compound (for reinstall)

  4. Test heater current

    A heater with reduced current draws keeps the sensor cool, which slows its response. Measure heater current — typical 0.8 to 2 A. Below 0.5 A is "weak" heater that does not warm fast enough.

    Tools: Multimeter with current function

  5. Confirm sensor is OEM spec on previously-replaced units

    Aftermarket O2 sensors at half the OEM price often have a slower response curve that sets P0133 even when "working." Confirm the installed sensor is the correct part number for this vehicle's year, make, model, engine, and emissions package (federal vs. California).

    Tools: Sensor part number verification

NHTSA complaints & recalls for the 2022 Honda Pilot

Owner-reported safety complaints and official recalls filed with the U.S. National Highway Traffic Safety Administration for the 2022 Honda Pilot. Use these to gauge how common a problem is on your specific vehicle before you start chasing Honda Pilot diagnostics.

121 owner complaints
5 involved a crash
3 reported injuries
  • ENGINE 21
  • POWER TRAIN 12
  • FORWARD COLLISION AVOIDANCE 33
  • UNKNOWN OR OTHER 27
  • ELECTRICAL SYSTEM 26

4 active recalls

  • BACK OVER PREVENTION:DISPLAY FUNCTION Jun 2023

    Honda (American Honda Motor Co.) is recalling certain 2018-2023 Odyssey, 2019-2022 Pilot, and 2019-2023 Passport vehicles. Due to a faulty Media Oriented Systems Transport (MOST) communication coaxial cable connector, the rearview camera image may not appear on the display. As…

    NHTSA campaign 23V431000
  • SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER Jun 2023

    Honda (American Honda Motor Co.) is recalling certain 2020-2021 Civic, 2020-2023 Ridgeline, 2021-2023 Passport, 2021-2022 Pilot, and 2020 Acura MDX vehicles. The tie rod fastener that connects the brake booster and the brake master cylinder may have been improperly assembled dur…

    NHTSA campaign 23V458000
  • AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION:FRONT PASSENGER Feb 2024

    Honda (American Honda Motor Co.) is recalling certain 2020-2022 Pilot, Accord, Civic sedan, HR-V, Odyssey, 2020 Civic coupe, Fit, 2021-2022 Civic hatchback, 2021 Civic Type R, Insight, 2020-2021 CR-V, CR-V Hybrid, Passport, Ridgeline, Accord Hybrid, 2020 Acura MDX, 2022 Acura MDX…

    NHTSA campaign 24V064000
  • AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION:FRONT PASSENGER May 2026

    Honda (American Honda Motor Co.) is recalling certain 2018-2021, 2023 Acura TLX, 2019-2024 RDX, 2017-2020, 2022-2026 MDX, 2017-2021, 2023, 2025 Honda Ridgeline, 2017-2022 Pilot, 2019-2021 Passport, 2018-2026 Odyssey, 2019-2022 Insight, 2019-2021 HR-V, 2018-2020 Fit, 2020-2022 CR-…

    NHTSA campaign 26V332000

How do I fix P0133 on a 2022 Honda Pilot?

About the 2020-2024 Honda Pilot

The 2020-2024 Honda Pilot was commonly sold with the following powertrains: 3.5L V6. Common trims include LX, EX, EX-L, Touring, Elite, TrailSport.

Why P0133 leads to P0420

A lazy upstream O2 sensor confuses the catalyst monitor. The downstream sensor sees what the upstream sensor reports plus a delay through the catalyst. If the upstream sensor itself is delayed, the downstream readings look “too similar” to upstream — and the ECM concludes the catalyst is dead. A P0133 left unresolved for months often produces a P0420 that was never the catalyst’s fault.

RTV / silicone gasket damage

P0133 occurring shortly after engine work — particularly intake manifold, valve cover, or oil pan replacement — is often caused by silicone vapor from un-cured RTV sealant. The vapor coats the O2 sensor element and slows it permanently. The fix is the sensor; the prevention is using “sensor safe” RTV (always check the label) and letting the sealant fully cure before starting the engine.

OEM vs. aftermarket O2 sensors

P0133 specifically is sensitive to the response curve of the sensor — and cheap aftermarket sensors often have slower curves even when they are otherwise functional. A $30 generic O2 might work for years on a 1995 vehicle but will set P0133 on a 2018 vehicle whose ECM expects faster switching. Buy NTK, Denso, or Bosch sensors of the exact part number called out for the vehicle.

Related diagnostic codes