P0606 on a 2022 GMC Sierra 1500
PCM Internal Processor Fault
P0606 on a 2022 GMC Sierra 1500 indicates pcm internal processor fault. Stop driving and diagnose it before continuing — it can signal an unsafe condition. The most common cause is low battery voltage or weak battery causing pcm brown-out (typically $100–$350). Confirm the root cause before replacing parts.
What does P0606 mean on a 2022 GMC Sierra 1500?
P0606 is set when the engine control module's internal self-test detects an inconsistency in its own processor — typically a RAM test, ROM checksum, watchdog timeout, or processor brown-out. Unlike most OBD-II codes which point to an external sensor or actuator, P0606 is the PCM saying "something is wrong with me." The cause is usually a power or ground issue, water intrusion, or the PCM itself failing.
This guide covers P0606 across the 2020-2024 GMC Sierra 1500 generation — the symptoms, causes, and diagnostic steps below apply to every model year from 2020 through 2024.
Is it safe to drive a 2022 GMC Sierra 1500 with P0606?
No. P0606 is a high-severity code on the 2022 GMC Sierra 1500 — avoid driving until it is diagnosed and repaired, as it can indicate an unsafe condition or risk further damage.
What are the symptoms of P0606 on a 2022 GMC Sierra 1500?
- Check Engine Light is illuminated
- Reduced engine power / limp mode
- Erratic or random drivability issues
- Multiple unrelated codes setting simultaneously
- Hard starting or no-start
- Loss of communication with scan tool intermittently
- Random stalling
What causes P0606 on a 2022 GMC Sierra 1500?
| Cause | Likelihood | Estimated repair (USD) |
|---|---|---|
| Low battery voltage or weak battery causing PCM brown-out Always test battery and charging before condemning the PCM. | Most common | $100–$350 |
| Corroded or loose PCM power / ground connection | Common | $50–$250 |
| Water intrusion into the PCM enclosure | Common | $400–$1,500 |
| Failed PCM module (internal electronics) | Common | $500–$1,500 |
| Failed alternator producing dirty / noisy charging voltage | Occasional | $200–$700 |
| Software corruption requiring reflash | Occasional | $100–$400 |
How to diagnose this on a 2022 GMC Sierra 1500
-
Test the battery and charging system FIRST
P0606 from low voltage is the most common cause and the cheapest fix. A battery weaker than 12.4 V at rest, or charging voltage below 13.5 V at idle, can brown out the PCM and set P0606. Replace the battery or repair the alternator before touching the PCM.
Tools: Multimeter, Battery load tester
-
Check PCM power and ground connections
Locate the PCM (typically under the hood near the firewall, or under the dash). Inspect every connector for corrosion, bent pins, or water damage. Verify all ground straps from the engine and PCM are tight to clean bare metal. Loose grounds cause classic intermittent P0606.
Tools: Multimeter, Wire brush, Electrical contact cleaner
-
Inspect the PCM for water intrusion
Remove the PCM and inspect the case seam, connector seals, and the PCB visible through any vents. Green corrosion on the board confirms water damage — replacement is the only fix at that point. Common entry points: cowl drain blockage, rear-vent seal failure, or aftermarket sunroof drain issues.
Tools: Socket set, Inspection light
-
Read all codes from all modules
P0606 alone is one thing; P0606 with codes from 3+ other modules (TCM, ABS, BCM) usually points at a shared cause like low system voltage. Pull codes from every module before deciding the PCM is the problem.
Tools: Scan tool with multi-module access
-
Try a PCM reflash before replacement
Sometimes P0606 is caused by software corruption — particularly after a battery disconnect or jump-start with reversed polarity. A dealer or independent shop with the correct programming software can attempt a reflash for a fraction of the replacement cost.
Tools: OEM scan tool or J2534 reprogramming setup
NHTSA complaints & recalls for the 2022 GMC Sierra 1500
Owner-reported safety complaints and official recalls filed with the U.S. National Highway Traffic Safety Administration for the 2022 GMC Sierra 1500. Use these to gauge how common a problem is on your specific vehicle before you start chasing GMC Sierra 1500 diagnostics.
- ENGINE 207
- POWER TRAIN 92
- STRUCTURE 90
- ELECTRICAL SYSTEM 75
- UNKNOWN OR OTHER 70
6 active recalls
- EXTERIOR LIGHTING:BRAKE LIGHTS Jun 2022
General Motors (GM) has decided that certain 2022 model year Chevrolet Silverado, and GMC Sierra vehicles equipped with an accessory sport bar. The accessory sport bar contains a high-mounted brake light that may not function. In addition, it may block the vehicle's existing hi…
NHTSA campaign 22V463000 - EXTERIOR LIGHTING:LIGHTING CONTROL MODULE:SOFTWARE Dec 2022
General Motors, LLC (GM) is recalling certain 2020-2023 Cadillac CT4 and CT5; 2021-2023 Buick Envision; and 2022-2023 Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles. The daytime running lights (DRLs) m…
NHTSA campaign 22V903000 - POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE Oct 2024
General Motors, LLC (GM) is recalling certain 2020-2022 Chevrolet Silverado 1500, 2500, 3500, GMC Sierra 1500, 2500, 3500, 2021 Cadillac Escalade, Escalade ESV, Chevrolet Tahoe, Suburban, GMC Yukon, and Yukon XL vehicles equipped with diesel engines. The transmission control val…
NHTSA campaign 24V797000 - STRUCTURE:BODY:BUMPERS:ACTIVE SHUTTERS/GRILL Feb 2025
General Motors, LLC (GM) is recalling certain 2022 GMC Sierra 1500 vehicles equipped with chrome front grille deflectors. The attachments that hold the front grille deflectors in place may fracture, resulting in grille detachment.…
NHTSA campaign 25V060000
How do I fix P0606 on a 2022 GMC Sierra 1500?
- Replace the battery and / or alternator
- Clean and re-tighten all PCM power and ground connections
- Repair water intrusion source and replace the PCM
- Replace the PCM with a programmed unit
- Reflash the PCM software
About the 2020-2024 GMC Sierra 1500
The 2020-2024 GMC Sierra 1500 was commonly sold with the following powertrains: 5.3L V8, 6.2L V8, 2.7L Turbo I4, 3.0L Duramax I6 Diesel. Common trims include Pro, SLE, Elevation, SLT, AT4, Denali.
Why a weak battery sets P0606
Modern engine control modules require stable voltage to run their internal self-tests. When voltage dips below approximately 9 V during a crank — even briefly — the PCM may reset, fail an internal check, and store P0606 as evidence of the brown-out. This is so common that “load-test the battery” is always the first diagnostic step. Replacing a $120 battery has resolved more P0606 codes than any other single repair.
Water intrusion and the cowl drain
A clogged cowl drain (the drain that lets rainwater out from under the windshield wipers) can let water pool against the firewall — directly above where many vehicles mount the PCM. Over time water wicks into the connector and corrodes the board. Always check the cowl drain when investigating P0606, especially on vehicles parked outdoors and on those with visible water staining inside the cabin.
PCM replacement is the last resort
A PCM costs $400–$1,500 and must usually be programmed and keyed to the vehicle before it will run. Try every cheaper cause first:
- Battery and charging system test
- Power and ground connection inspection
- Multi-module code scan
- Software reflash
Only after all of those fail should the PCM itself be condemned. Refurbished and remanufactured PCMs are available at 30–50 % of new prices and are sometimes a better choice on older vehicles.