P0430 on a 2022 Subaru Forester

Catalyst Efficiency Below Threshold (Bank 2)

P0430 on a 2022 Subaru Forester indicates catalyst efficiency below threshold (bank 2). It usually stays drivable short-term but should be diagnosed promptly. The most common cause is worn or contaminated catalytic converter on bank 2 (typically $600–$2,400). Confirm the root cause before replacing parts.

Severity: moderate Safe to drive (short term) Compact SUV 2020-2024 Subaru Forester

Reviewed by MECH AI Editorial · Last verified

What does P0430 mean on a 2022 Subaru Forester?

P0430 is the Bank 2 counterpart of P0420. It is set when the engine control module compares the upstream and downstream oxygen sensor signals on Bank 2 and determines that the catalytic converter for that bank is no longer storing and releasing oxygen efficiently. P0430 only applies to V-engines and inline engines with separate exhaust banks; four-cylinder engines do not set P0430.

This guide covers P0430 across the 2020-2024 Subaru Forester generation — the symptoms, causes, and diagnostic steps below apply to every model year from 2020 through 2024.

Is it safe to drive a 2022 Subaru Forester with P0430?

In most cases a 2022 Subaru Forester stays drivable for short trips with P0430 active, but diagnose and repair it promptly. This is a moderate-severity code — ignoring it can lead to further damage or a failed emissions test.

What are the symptoms of P0430 on a 2022 Subaru Forester?

What causes P0430 on a 2022 Subaru Forester?

Cause Likelihood Estimated repair (USD)
Worn or contaminated catalytic converter on Bank 2 Most common $600–$2,400
Failing downstream (post-catalyst) O2 sensor on Bank 2 Common $150–$450
Exhaust leak upstream of the Bank 2 downstream O2 sensor Common $100–$500
Untreated misfire or rich/lean condition on Bank 2 cooking the cat Occasional $200–$1,200
Oil or coolant contamination from internal engine wear poisoning the cat Rare $1,200–$3,500
Cheap aftermarket catalytic converter that does not meet OEM efficiency Occasional $600–$1,800

How to diagnose this on a 2022 Subaru Forester

  1. Identify Bank 2 on this engine

    Bank 2 is the cylinder bank that does not contain cylinder 1. On most transverse V6 engines (Honda, Toyota, Nissan) Bank 2 is the bank closer to the radiator. On longitudinal V8 engines like Ford modular, Bank 2 is the passenger side. Confirm in the service manual before replacing parts.

    Tools: Vehicle-specific service information

  2. Pull all stored and pending codes

    Address any misfire codes (P0300-series) or fuel trim codes (P0171, P0174) on Bank 2 first. They will continue to damage the catalyst until resolved.

    Tools: OBD-II scan tool

  3. Inspect the Bank 2 exhaust for leaks

    Cold-start the engine and listen along the Bank 2 manifold, header, flex pipe, and gasket seams. A leak upstream of the rear O2 sensor pulls in fresh air, mimics catalyst failure, and is far cheaper to repair than a converter.

    Tools: Mechanic's stethoscope, Flashlight

  4. Graph upstream vs downstream O2 sensors on Bank 2

    With the engine warmed up and held at 2000 RPM, graph the Bank 2 upstream O2 sensor (should switch rapidly between 0.1 V and 0.9 V) and the Bank 2 downstream O2 sensor (should stay relatively steady around 0.6–0.8 V). Downstream that mirrors upstream confirms catalyst loss.

    Tools: Scan tool with graphing PIDs

  5. Rap-test the Bank 2 catalytic converter

    Tap the converter body with a rubber mallet. A rattle confirms the ceramic substrate has broken apart. Visual inspection of the inlet and outlet through a flashlight beam can sometimes reveal melted cells.

    Tools: Rubber mallet, Flashlight

NHTSA complaints & recalls for the 2022 Subaru Forester

Owner-reported safety complaints and official recalls filed with the U.S. National Highway Traffic Safety Administration for the 2022 Subaru Forester. Use these to gauge how common a problem is on your specific vehicle before you start chasing Subaru Forester diagnostics.

92 owner complaints
8 involved a crash
6 involved a fire
5 reported injuries
  • ENGINE 10
  • VEHICLE SPEED CONTROL 9
  • VISIBILITY/WIPER 20
  • UNKNOWN OR OTHER 17
  • FORWARD COLLISION AVOIDANCE 12

1 active recall

  • POWER TRAIN:AUTOMATIC TRANSMISSION:PARK/NEUTRAL START INTERLOCK SWITCH Nov 2023

    Subaru of America, Inc. is recalling certain model year 2021 Crosstrek, 2022 Forester, 2021-2023 Legacy, and Outback vehicles. An insufficient weld may allow water to enter the inhibitor switch, causing it to fail.…

    NHTSA campaign 23V755000

How do I fix P0430 on a 2022 Subaru Forester?

About the 2020-2024 Subaru Forester

The 2020-2024 Subaru Forester was commonly sold with the following powertrains: 2.5L H4, 2.0L Turbo H4. Common trims include Base, Premium, Sport, Limited, Touring, Wilderness.

Why P0420 and P0430 often appear together

If both bank codes set within days of each other on a high-mileage V-engine, the most likely explanation is that both converters have simply aged out together. A less common but worth-checking explanation is that the engine itself is producing higher hydrocarbon output across all cylinders — for example after timing chain stretch or compression loss — which is overworking both catalysts simultaneously.

Catalyst replacement: OEM vs. aftermarket vs. universal

OEM converters are expensive but reliably pass P0420/P0430 monitors and typically last another 150,000 miles. CARB-compliant aftermarket converters (required in California, Colorado, New York, and several other states) come close to OEM performance at 40–60 % of the price. Universal cheap converters sold without state certification frequently set P0430 again within 6–18 months and are also illegal in many jurisdictions.

What to fix before the catalyst

If P0430 has been present alongside any of these — repair them first: P0172 (rich Bank 1), P0175 (rich Bank 2), P0300-series (misfires), P0171 or P0174 (lean condition), or coolant in the exhaust (head gasket). Replacing the catalyst without fixing the root cause will destroy the new one within months.

Related diagnostic codes