P0411 on a 2022 Kia Sorento
Secondary Air Injection Insufficient Flow
P0411 on a 2022 Kia Sorento indicates secondary air injection insufficient flow. It usually stays drivable short-term but should be diagnosed promptly. The most common cause is failed secondary air injection pump motor (typically $300–$1,200). Confirm the root cause before replacing parts.
What does P0411 mean on a 2022 Kia Sorento?
P0411 is set when the engine control module commands the secondary air injection (SAI) system to inject air into the exhaust during cold start and does not detect the expected oxygen reading at the upstream O2 sensors. The SAI system is a separate pump that blows fresh air into the exhaust manifold for the first 60–90 seconds after cold start, helping the catalyst light off faster and reducing cold-start emissions. P0411 means that air injection is not happening — usually because the SAI pump, check valve, or control valve has failed.
This guide covers P0411 across the 2020-2024 Kia Sorento generation — the symptoms, causes, and diagnostic steps below apply to every model year from 2020 through 2024.
Is it safe to drive a 2022 Kia Sorento with P0411?
In most cases a 2022 Kia Sorento stays drivable for short trips with P0411 active, but diagnose and repair it promptly. This is a low-severity code — ignoring it can lead to further damage or a failed emissions test.
What are the symptoms of P0411 on a 2022 Kia Sorento?
- Check Engine Light is illuminated
- Whirring sound from the SAI pump during cold start (or absence of one)
- Slightly elevated cold-start emissions
- Vehicle will fail emissions / smog testing
- No noticeable drivability symptoms once warm
What causes P0411 on a 2022 Kia Sorento?
| Cause | Likelihood | Estimated repair (USD) |
|---|---|---|
| Failed secondary air injection pump motor Particularly common on VW, Audi, BMW, Porsche, and Mercedes vehicles. | Most common | $300–$1,200 |
| Stuck or seized SAI combination valve / check valve | Common | $200–$700 |
| SAI vacuum control solenoid failure | Common | $80–$350 |
| Cracked or disconnected SAI hose | Common | $50–$300 |
| Carbon-clogged SAI passages in the exhaust manifold | Occasional | $400–$1,500 |
| Failed SAI relay | Occasional | $30–$150 |
| Wiring fault to the SAI pump or solenoid | Occasional | $80–$350 |
How to diagnose this on a 2022 Kia Sorento
-
Listen for the SAI pump on cold start
On a cold engine (sat overnight), start the vehicle and listen for the SAI pump — a distinct whirring or humming sound from under the hood for 60–90 seconds. Silence at cold start means the pump is not running. Note: SAI does not operate on warm restarts, so the test only works on a truly cold engine.
Tools: Cold engine (sat overnight)
-
Test the SAI pump electrically
Locate the SAI pump (often in the engine bay or under a fender liner). Disconnect the connector and apply 12 V directly. A working pump runs immediately. Silence confirms a dead pump.
Tools: Jumper wires, 12 V supply (battery)
-
Inspect the SAI hose
Trace the air hose from the pump to the exhaust manifold area. Cracks, splits, or disconnections are common — especially on rubber hoses that have spent 10+ years near hot exhaust components. A failed hose means the pump runs but no air reaches the exhaust.
Tools: Flashlight, Inspection mirror
-
Test the combination / check valve
The SAI combination valve prevents exhaust from back-feeding into the pump. Remove and inspect — should freely allow air in one direction and seal in the other. Carbon buildup on the valve from years of exhaust exposure is the typical failure mode.
Tools: Service manual procedure, Carb cleaner
-
Read freeze-frame conditions
Note the engine temperature, vehicle speed, and time-since- start in the freeze frame. P0411 only sets within the cold- start enrichment window. If freeze frame shows the engine already warm, suspect a sensor or wiring issue rather than the pump itself.
Tools: Scan tool with freeze-frame data
NHTSA complaints & recalls for the 2022 Kia Sorento
Owner-reported safety complaints and official recalls filed with the U.S. National Highway Traffic Safety Administration for the 2022 Kia Sorento. Use these to gauge how common a problem is on your specific vehicle before you start chasing Kia Sorento diagnostics.
- POWER TRAIN 57
- ENGINE 49
- UNKNOWN OR OTHER 36
- ELECTRICAL SYSTEM 26
- SERVICE BRAKES 17
6 active recalls
- ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER Mar 2022
Kia Motor America (Kia) is recalling certain 2022 Sorento vehicles. The oil supply pipe to the turbocharger may crack, which could result in an oil leak in the engine compartment.…
NHTSA campaign 22V202000 - TIRES:TEMPORARY/EMERGENCY SPARE TIRE Jul 2022
Kia Motors America (Kia) is recalling certain 2022 Sorento and Telluride vehicles. The vehicles may be equipped with an incorrect spare tire which, when installed, can impair the anti-lock braking system (ABS) and the traction control system (TCS). As such, these vehicles fail…
NHTSA campaign 22V509000 - TRAILER HITCHES Sep 2022
Kia America, Inc. (Kia) is recalling certain 2016-2022 Sorento, 2021-2022 Sorento Hybrid (HEV), 2022-2023 Sorento Plug-In Hybrid (PHEV), and 2017-2022 Sportage vehicles equipped with a tow hitch harness installed as original equipment, or purchased as an accessory through a Kia d…
NHTSA campaign 22V703000 - POWER TRAIN:AUTOMATIC TRANSMISSION Oct 2022
Kia Motors, Inc. (Kia) is recalling certain 2021-2022 Sorento and 2021-2023 K5 vehicles. The vehicle's "fail-safe" limited-mobility drive mode may be impaired, when prompted by a transmission oil pump malfunction, which can result in a complete loss of drive power.…
NHTSA campaign 22V760000
How do I fix P0411 on a 2022 Kia Sorento?
- Replace the secondary air injection pump
- Replace the SAI combination / check valve
- Replace the SAI vacuum control solenoid
- Repair or replace cracked SAI hoses
- Clean carbon-clogged SAI passages in the exhaust manifold
About the 2020-2024 Kia Sorento
The 2020-2024 Kia Sorento was commonly sold with the following powertrains: 2.5L I4, 2.5L Turbo I4, 1.6L Turbo Hybrid I4, 1.6L Plug-in Hybrid I4. Common trims include LX, S, EX, SX, SX-Prestige, X-Line.
Why P0411 is rare in the US fleet but common on European cars
US-market vehicles largely phased out secondary air injection in the 2010s as more efficient catalyst designs made it unnecessary. European-market vehicles continued using SAI well into the 2020s for tighter Euro 6 standards. As a result:
- VW, Audi, BMW, Porsche, Mercedes (2003-2018) — chronic SAI pump failures. The pump motor is often the most common failure point on these vehicles.
- US Domestic (Ford, GM, Chrysler 2005-2012) — used SAI on some platforms; eventually deleted.
- Most US vehicles 2015+ — no SAI system, so P0411 doesn’t apply.
If P0411 sets on a US-spec vehicle from the late 2010s or newer, double-check that the vehicle actually has an SAI system before diagnosing.
Carbon clogging in SAI passages
A common longer-term failure mode: SAI passages in the exhaust manifold accumulate carbon over years of use. Eventually airflow is restricted enough that even a working pump cannot deliver enough oxygen to the upstream O2 sensors during cold start. Cleaning the passages requires manifold removal — labor intensive. Some shops decline this repair and quote a full SAI delete (where legally permitted).
Drive cycle to verify a P0411 repair
P0411 only re-sets during cold-start enrichment. After any repair:
- Cold soak the engine 8+ hours
- Cold start and idle 2.5 minutes
- Drive a normal cycle, return home
- Repeat for 2-3 cold starts before assuming the fix held
A single warm-restart test cannot reproduce or rule out P0411.