P0411 on a 2022 GMC Sierra 1500
Secondary Air Injection Insufficient Flow
P0411 on a 2022 GMC Sierra 1500 indicates secondary air injection insufficient flow. It usually stays drivable short-term but should be diagnosed promptly. The most common cause is failed secondary air injection pump motor (typically $300–$1,200). Confirm the root cause before replacing parts.
What does P0411 mean on a 2022 GMC Sierra 1500?
P0411 is set when the engine control module commands the secondary air injection (SAI) system to inject air into the exhaust during cold start and does not detect the expected oxygen reading at the upstream O2 sensors. The SAI system is a separate pump that blows fresh air into the exhaust manifold for the first 60–90 seconds after cold start, helping the catalyst light off faster and reducing cold-start emissions. P0411 means that air injection is not happening — usually because the SAI pump, check valve, or control valve has failed.
This guide covers P0411 across the 2020-2024 GMC Sierra 1500 generation — the symptoms, causes, and diagnostic steps below apply to every model year from 2020 through 2024.
Is it safe to drive a 2022 GMC Sierra 1500 with P0411?
In most cases a 2022 GMC Sierra 1500 stays drivable for short trips with P0411 active, but diagnose and repair it promptly. This is a low-severity code — ignoring it can lead to further damage or a failed emissions test.
What are the symptoms of P0411 on a 2022 GMC Sierra 1500?
- Check Engine Light is illuminated
- Whirring sound from the SAI pump during cold start (or absence of one)
- Slightly elevated cold-start emissions
- Vehicle will fail emissions / smog testing
- No noticeable drivability symptoms once warm
What causes P0411 on a 2022 GMC Sierra 1500?
| Cause | Likelihood | Estimated repair (USD) |
|---|---|---|
| Failed secondary air injection pump motor Particularly common on VW, Audi, BMW, Porsche, and Mercedes vehicles. | Most common | $300–$1,200 |
| Stuck or seized SAI combination valve / check valve | Common | $200–$700 |
| SAI vacuum control solenoid failure | Common | $80–$350 |
| Cracked or disconnected SAI hose | Common | $50–$300 |
| Carbon-clogged SAI passages in the exhaust manifold | Occasional | $400–$1,500 |
| Failed SAI relay | Occasional | $30–$150 |
| Wiring fault to the SAI pump or solenoid | Occasional | $80–$350 |
How to diagnose this on a 2022 GMC Sierra 1500
-
Listen for the SAI pump on cold start
On a cold engine (sat overnight), start the vehicle and listen for the SAI pump — a distinct whirring or humming sound from under the hood for 60–90 seconds. Silence at cold start means the pump is not running. Note: SAI does not operate on warm restarts, so the test only works on a truly cold engine.
Tools: Cold engine (sat overnight)
-
Test the SAI pump electrically
Locate the SAI pump (often in the engine bay or under a fender liner). Disconnect the connector and apply 12 V directly. A working pump runs immediately. Silence confirms a dead pump.
Tools: Jumper wires, 12 V supply (battery)
-
Inspect the SAI hose
Trace the air hose from the pump to the exhaust manifold area. Cracks, splits, or disconnections are common — especially on rubber hoses that have spent 10+ years near hot exhaust components. A failed hose means the pump runs but no air reaches the exhaust.
Tools: Flashlight, Inspection mirror
-
Test the combination / check valve
The SAI combination valve prevents exhaust from back-feeding into the pump. Remove and inspect — should freely allow air in one direction and seal in the other. Carbon buildup on the valve from years of exhaust exposure is the typical failure mode.
Tools: Service manual procedure, Carb cleaner
-
Read freeze-frame conditions
Note the engine temperature, vehicle speed, and time-since- start in the freeze frame. P0411 only sets within the cold- start enrichment window. If freeze frame shows the engine already warm, suspect a sensor or wiring issue rather than the pump itself.
Tools: Scan tool with freeze-frame data
NHTSA complaints & recalls for the 2022 GMC Sierra 1500
Owner-reported safety complaints and official recalls filed with the U.S. National Highway Traffic Safety Administration for the 2022 GMC Sierra 1500. Use these to gauge how common a problem is on your specific vehicle before you start chasing GMC Sierra 1500 diagnostics.
- ENGINE 207
- POWER TRAIN 92
- STRUCTURE 90
- ELECTRICAL SYSTEM 75
- UNKNOWN OR OTHER 70
6 active recalls
- EXTERIOR LIGHTING:BRAKE LIGHTS Jun 2022
General Motors (GM) has decided that certain 2022 model year Chevrolet Silverado, and GMC Sierra vehicles equipped with an accessory sport bar. The accessory sport bar contains a high-mounted brake light that may not function. In addition, it may block the vehicle's existing hi…
NHTSA campaign 22V463000 - EXTERIOR LIGHTING:LIGHTING CONTROL MODULE:SOFTWARE Dec 2022
General Motors, LLC (GM) is recalling certain 2020-2023 Cadillac CT4 and CT5; 2021-2023 Buick Envision; and 2022-2023 Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles. The daytime running lights (DRLs) m…
NHTSA campaign 22V903000 - POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE Oct 2024
General Motors, LLC (GM) is recalling certain 2020-2022 Chevrolet Silverado 1500, 2500, 3500, GMC Sierra 1500, 2500, 3500, 2021 Cadillac Escalade, Escalade ESV, Chevrolet Tahoe, Suburban, GMC Yukon, and Yukon XL vehicles equipped with diesel engines. The transmission control val…
NHTSA campaign 24V797000 - STRUCTURE:BODY:BUMPERS:ACTIVE SHUTTERS/GRILL Feb 2025
General Motors, LLC (GM) is recalling certain 2022 GMC Sierra 1500 vehicles equipped with chrome front grille deflectors. The attachments that hold the front grille deflectors in place may fracture, resulting in grille detachment.…
NHTSA campaign 25V060000
How do I fix P0411 on a 2022 GMC Sierra 1500?
- Replace the secondary air injection pump
- Replace the SAI combination / check valve
- Replace the SAI vacuum control solenoid
- Repair or replace cracked SAI hoses
- Clean carbon-clogged SAI passages in the exhaust manifold
About the 2020-2024 GMC Sierra 1500
The 2020-2024 GMC Sierra 1500 was commonly sold with the following powertrains: 5.3L V8, 6.2L V8, 2.7L Turbo I4, 3.0L Duramax I6 Diesel. Common trims include Pro, SLE, Elevation, SLT, AT4, Denali.
Why P0411 is rare in the US fleet but common on European cars
US-market vehicles largely phased out secondary air injection in the 2010s as more efficient catalyst designs made it unnecessary. European-market vehicles continued using SAI well into the 2020s for tighter Euro 6 standards. As a result:
- VW, Audi, BMW, Porsche, Mercedes (2003-2018) — chronic SAI pump failures. The pump motor is often the most common failure point on these vehicles.
- US Domestic (Ford, GM, Chrysler 2005-2012) — used SAI on some platforms; eventually deleted.
- Most US vehicles 2015+ — no SAI system, so P0411 doesn’t apply.
If P0411 sets on a US-spec vehicle from the late 2010s or newer, double-check that the vehicle actually has an SAI system before diagnosing.
Carbon clogging in SAI passages
A common longer-term failure mode: SAI passages in the exhaust manifold accumulate carbon over years of use. Eventually airflow is restricted enough that even a working pump cannot deliver enough oxygen to the upstream O2 sensors during cold start. Cleaning the passages requires manifold removal — labor intensive. Some shops decline this repair and quote a full SAI delete (where legally permitted).
Drive cycle to verify a P0411 repair
P0411 only re-sets during cold-start enrichment. After any repair:
- Cold soak the engine 8+ hours
- Cold start and idle 2.5 minutes
- Drive a normal cycle, return home
- Repeat for 2-3 cold starts before assuming the fix held
A single warm-restart test cannot reproduce or rule out P0411.