P0300 on a 2017 Nissan Sentra
Random or Multiple Cylinder Misfire
P0300 on a 2017 Nissan Sentra indicates random or multiple cylinder misfire. Stop driving and diagnose it before continuing — it can signal an unsafe condition. The most common cause is worn or fouled spark plugs (all cylinders due for replacement) (typically $60–$350). Confirm the root cause before replacing parts.
What does P0300 mean on a 2017 Nissan Sentra?
P0300 is set when the engine control module's misfire monitor detects that combustion is failing in more than one cylinder, or that misfires are occurring randomly across cylinders rather than being isolated to a single one. The misfire monitor works by measuring tiny variations in crankshaft rotational speed — a missed combustion event causes the crankshaft to decelerate by a detectable amount. When the ECM cannot attribute the event to a single cylinder, it sets P0300.
This guide covers P0300 across the 2015-2019 Nissan Sentra generation — the symptoms, causes, and diagnostic steps below apply to every model year from 2015 through 2019.
Is it safe to drive a 2017 Nissan Sentra with P0300?
No. P0300 is a high-severity code on the 2017 Nissan Sentra — avoid driving until it is diagnosed and repaired, as it can indicate an unsafe condition or risk further damage.
What are the symptoms of P0300 on a 2017 Nissan Sentra?
- Check Engine Light flashing (severe misfire) or steady (minor misfire)
- Rough idle and noticeable engine shake at a stop
- Hesitation or stumble under load
- Loss of power, especially at higher RPM or on hills
- Reduced fuel economy
- Smell of raw fuel from the exhaust
- Possible catalytic converter damage with prolonged operation
What causes P0300 on a 2017 Nissan Sentra?
| Cause | Likelihood | Estimated repair (USD) |
|---|---|---|
| Worn or fouled spark plugs (all cylinders due for replacement) Especially common past 80,000 miles on platinum or iridium plugs. | Most common | $60–$350 |
| Failing ignition coils — coil-on-plug systems | Most common | $80–$600 |
| Vacuum leak causing lean misfire across all cylinders | Common | $80–$500 |
| Low fuel pressure (weak pump, clogged filter) | Common | $80–$900 |
| Clogged or leaking fuel injectors | Occasional | $150–$1,500 |
| Carbon-fouled intake valves (direct-injection engines) | Occasional | $400–$900 |
| Low engine compression (worn rings, burnt valve, head gasket) | Rare | $1,500–$5,000 |
| Failed crankshaft or camshaft position sensor causing timing issues | Rare | $150–$550 |
How to diagnose this on a 2017 Nissan Sentra
-
Pull every code, including pending and freeze-frame data
Read all stored, pending, and permanent codes. Note which cylinder(s) show misfire counts in mode 6 or the manufacturer-specific misfire PID. Freeze-frame data tells you the engine load, RPM, and temperature when the misfire occurred — critical for narrowing down the cause.
Tools: Scan tool with mode 6 / misfire counters
-
Swap ignition coils between cylinders
On a coil-on-plug system, move the coil from a suspect cylinder to a known-good cylinder. Clear codes, drive, and re-read. If the misfire follows the coil, the coil is bad. If it stays in the same cylinder, the coil is not the cause.
Tools: Socket set, Torque wrench (for plug torque on reassembly)
-
Inspect spark plugs visually
Remove all spark plugs. Compare their appearance. A black, sooty plug indicates a rich condition for that cylinder. A wet, fuel-smelling plug means no spark or no compression on that cylinder. White or blistered ceramic indicates an overly lean condition. Replace the full set if any are out of spec or past service interval.
Tools: Spark plug socket, Extension and ratchet, Anti-seize and torque wrench
-
Test fuel pressure under load
Connect a fuel pressure gauge and observe pressure at idle, snap-throttle, and steady cruise. A weak pump may hold pressure at idle but drop under load — the time pattern matters as much as the absolute reading.
Tools: Fuel pressure gauge
-
Perform a cylinder compression or relative-compression test
If misfires persist after ignition and fuel system work, perform a compression test on each cylinder, or use a scan tool's relative compression function. Cylinders more than 15 % below the rest indicate a mechanical problem (rings, valves, or head gasket).
Tools: Compression tester, Scan tool with relative compression
NHTSA complaints & recalls for the 2017 Nissan Sentra
Owner-reported safety complaints and official recalls filed with the U.S. National Highway Traffic Safety Administration for the 2017 Nissan Sentra. Use these to gauge how common a problem is on your specific vehicle before you start chasing Nissan Sentra diagnostics.
- POWER TRAIN 74
- ENGINE 48
- VEHICLE SPEED CONTROL 32
- UNKNOWN OR OTHER 37
- ELECTRICAL SYSTEM 33
3 active recalls
- ELECTRICAL SYSTEM:IGNITION Aug 2018
Nissan North America, Inc. (Nissan) is recalling certain 2017 Nissan NV200, Sentra, NV3500 Van, NV3500 Bus, NV200 Taxi, NV1500, NV2500 Van, Chevrolet City Express, 2017-2018 Frontier, Versa Note, and Versa Sedan vehicles that have a mechanical (physical) key ignition system. In…
NHTSA campaign 18V551000 - AIR BAGS Apr 2017
Nissan North America, Inc. (Nissan) is recalling certain 2015-2017 LEAF and 2014, 2016 and 2017 Sentra vehicles. Due to a manufacturing error within the air bag inflators, the passenger frontal air bag may not properly deploy in the event of a crash.…
NHTSA campaign 17V253000 - EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH Mar 2021
Nissan North America, Inc. (Nissan) is recalling certain 2016-2019 Nissan Sentra vehicles. The brake light switch may become contaminated, preventing the circuit from closing and the brake lights from illuminating.…
NHTSA campaign 21V135000
How do I fix P0300 on a 2017 Nissan Sentra?
- Replace all spark plugs as a set with the OEM-specified part
- Replace failed ignition coil(s)
- Repair any vacuum leaks found by smoke test
- Replace fuel pump, fuel filter, or pressure regulator
- Walnut-blast intake valves (carbon buildup, direct-injection engines)
- Replace failed crankshaft or camshaft sensor
About the 2015-2019 Nissan Sentra
The 2015-2019 Nissan Sentra was commonly sold with the following powertrains: 1.8L I4, 2.0L I4. Common trims include S, SV, SR.
Is it safe to drive with a P0300?
If the Check Engine Light is flashing, no — pull over and tow the vehicle. A flashing light means raw fuel is reaching the catalytic converter, where it will combust and destroy the substrate within minutes. Replacement catalysts are $600–$2,400. Driving home is not worth that risk.
If the light is steady, the misfire is intermittent or minor. The vehicle can usually be driven short distances to a repair shop, but every mile adds risk of catalyst damage.
Why P0300 with no cylinder-specific code is harder to diagnose
P0301 through P0308 narrow the problem to a single cylinder. P0300 alone means the misfire is jumping cylinders or affecting all of them — which points to a systemic cause: ignition system, fuel system, vacuum, or mechanical. Always start with mode 6 misfire counts to see if any cylinder is statistically worse, even if no per-cylinder code has matured yet.
When to suspect compression vs. ignition vs. fuel
| Symptom pattern | Likely root cause |
|---|---|
| Cold start misfire that clears warm | Carbon-fouled valves or worn plugs |
| Misfire only under load | Weak ignition coils or low fuel pressure |
| Misfire only at idle | Vacuum leak or dirty injectors |
| Misfire on the same cylinder despite coil/plug swap | Compression problem (valve or rings) |
| Random multi-cylinder misfire after fuel-up | Bad fuel |
P0300 on a 2017 Nissan Sentra: frequently asked questions
What does diagnostic trouble code P0300 mean on a 2017 Nissan Sentra?
P0300 is set when the engine control module's misfire monitor detects that combustion is failing in more than one cylinder, or that misfires are occurring randomly across cylinders rather than being isolated to a single one. The misfire monitor works by measuring tiny variations in crankshaft rotational speed — a missed combustion event causes the crankshaft to decelerate by a detectable amount. When the ECM cannot attribute the event to a single cylinder, it sets P0300.
What are the symptoms of P0300 on a 2017 Nissan Sentra?
Check Engine Light flashing (severe misfire) or steady (minor misfire). Rough idle and noticeable engine shake at a stop. Hesitation or stumble under load. Loss of power, especially at higher RPM or on hills. Reduced fuel economy. Smell of raw fuel from the exhaust. Possible catalytic converter damage with prolonged operation
What causes P0300 on a 2017 Nissan Sentra?
Worn or fouled spark plugs (all cylinders due for replacement) (most-common). Failing ignition coils — coil-on-plug systems (most-common). Vacuum leak causing lean misfire across all cylinders (common). Low fuel pressure (weak pump, clogged filter) (common). Clogged or leaking fuel injectors (occasional). Carbon-fouled intake valves (direct-injection engines) (occasional). Low engine compression (worn rings, burnt valve, head gasket) (rare). Failed crankshaft or camshaft position sensor causing timing issues (rare)
Is it safe to drive a 2017 Nissan Sentra with P0300?
No. P0300 is a high-severity code on the 2017 Nissan Sentra — avoid driving until it is diagnosed and repaired, as it can indicate an unsafe condition or risk further damage.