P0136 on Toyota vehicles
Post-Cat O2 Sensor Circuit Fault (Bank 1) — what it means on a Toyota, whether it's safe to drive, and the fixes by model and year.
P0136 on a Toyota means post-cat o2 sensor circuit fault (bank 1). Most vehicles stay drivable short-term, but diagnose it promptly. The most common cause is failed bank 1 downstream o2 sensor (typically $150–$450). Pick your Toyota model below for its known failure patterns, recalls, and TSBs.
What does P0136 mean on a Toyota?
P0136 is set when the ECM detects a general circuit fault on the Bank 1 downstream (post-catalyst) oxygen sensor. Unlike the more specific P0137 (low voltage), P0138 (high voltage), or P0140 (no activity), P0136 is the generic circuit code that covers wiring issues, intermittent connection problems, or signals that go outside expected ranges in a way that doesn't fit a more specific fault category.
P0136 is a standardized OBD-II code, so its definition is the same on every Toyota. What differs by model and engine is which cause is most likely — pick your Toyota model below for a diagnosis tuned to its known failure patterns, recalls, and TSBs.
Is it safe to drive a Toyota with P0136?
In most cases a Toyota stays drivable for short trips with P0136 active, but diagnose and repair it promptly. This is a moderate-severity code — ignoring it can lead to further damage or a failed emissions test. Exact tolerance depends on the model and engine.
What causes P0136 on a Toyota?
| Cause | Likelihood | Estimated repair (USD) |
|---|---|---|
| Failed Bank 1 downstream O2 sensor | Most common | $150–$450 |
| Damaged sensor wiring (chafed against exhaust) | Common | $80–$350 |
| Corroded O2 sensor connector | Common | $30–$200 |
| Exhaust leak upstream of the downstream sensor | Occasional | $100–$500 |
| Damaged or compressed sensor pigtail from a previous repair | Occasional | $80–$300 |
| Failed PCM input (rare) | Rare | $400–$1,500 |
Repair costs are typical US ranges and vary by Toyota model, model year, and labor rate. A diagnostic trouble code is a symptom, not a guaranteed failed part — confirm the root cause before replacing anything.
P0136 by Toyota model
Select your Toyota model and year for a P0136 diagnosis tuned to that vehicle's failure patterns, recalls, and TSBs.
Toyota RAV4
691 NHTSA owner complaints · 9 recalls on record across the years covered below.
Toyota Camry
842 NHTSA owner complaints · 6 recalls on record across the years covered below.
Toyota Corolla
721 NHTSA owner complaints · 8 recalls on record across the years covered below.
Toyota Tacoma
583 NHTSA owner complaints · 15 recalls on record across the years covered below.
Toyota 4Runner
170 NHTSA owner complaints · 16 recalls on record across the years covered below.
Toyota Highlander
650 NHTSA owner complaints · 11 recalls on record across the years covered below.
Toyota Sienna
393 NHTSA owner complaints · 22 recalls on record across the years covered below.
Complaint and recall counts are NHTSA totals for the model years covered on this site, not counts specific to P0136.
P0136 on other makes
Other codes on Toyota vehicles
P0136 on a Toyota: frequently asked questions
What does diagnostic trouble code P0136 mean on a Toyota?
P0136 is set when the ECM detects a general circuit fault on the Bank 1 downstream (post-catalyst) oxygen sensor. Unlike the more specific P0137 (low voltage), P0138 (high voltage), or P0140 (no activity), P0136 is the generic circuit code that covers wiring issues, intermittent connection problems, or signals that go outside expected ranges in a way that doesn't fit a more specific fault category. P0136 is a standardized OBD-II code, so the definition is the same on every Toyota — which cause is most likely varies by model and engine.
What are the symptoms of P0136 on a Toyota?
Check Engine Light is illuminated. Catalyst readiness monitor will not complete. Possible slight reduction in fuel economy. Often no drivability symptoms. Vehicle will fail emissions / smog testing
What causes P0136 on a Toyota?
Failed Bank 1 downstream O2 sensor (most-common). Damaged sensor wiring (chafed against exhaust) (common). Corroded O2 sensor connector (common). Exhaust leak upstream of the downstream sensor (occasional). Damaged or compressed sensor pigtail from a previous repair (occasional). Failed PCM input (rare) (rare)
Is it safe to drive a Toyota with P0136?
In most cases a Toyota stays drivable for short trips with P0136 active, but it should be diagnosed and repaired promptly — this is a moderate-severity code. Ignoring it can lead to further damage or a failed emissions test. Exact tolerance depends on the model and engine.