P0125 on a 2022 Toyota 4Runner

Coolant Too Cold for Closed-Loop Fuel Control

P0125 on a 2022 Toyota 4Runner indicates coolant too cold for closed-loop fuel control. It usually stays drivable short-term but should be diagnosed promptly. The most common cause is thermostat stuck open or partially open (typically $80–$350). Confirm the root cause before replacing parts.

Severity: low Safe to drive (short term) Mid-size SUV 2020-2024 Toyota 4Runner

Reviewed by MECH AI Editorial · Last verified

What does P0125 mean on a 2022 Toyota 4Runner?

P0125 is set when the engine fails to reach the calibrated closed-loop threshold temperature within a calibrated time and distance. Closed loop fuel control requires the engine to be warm enough that the oxygen sensors are reliable and the ECM can trust their feedback. When coolant never crosses that threshold, the ECM remains in open loop indefinitely and sets P0125 as evidence the engine is not reaching its operating temperature.

This guide covers P0125 across the 2020-2024 Toyota 4Runner generation — the symptoms, causes, and diagnostic steps below apply to every model year from 2020 through 2024.

Is it safe to drive a 2022 Toyota 4Runner with P0125?

In most cases a 2022 Toyota 4Runner stays drivable for short trips with P0125 active, but diagnose and repair it promptly. This is a low-severity code — ignoring it can lead to further damage or a failed emissions test.

What are the symptoms of P0125 on a 2022 Toyota 4Runner?

What causes P0125 on a 2022 Toyota 4Runner?

Cause Likelihood Estimated repair (USD)
Thermostat stuck open or partially open Most common $80–$350
Wrong-temperature thermostat installed Common $30–$200
Failed engine coolant temperature (ECT) sensor reading low Occasional $80–$250
Cooling fan running continuously due to a separate fault Occasional $100–$500
Heater core bypass leak letting coolant circulate freely Rare $50–$250

How to diagnose this on a 2022 Toyota 4Runner

  1. Compare coolant temperature climb to a known baseline

    Graph the coolant temperature PID from a cold start. The engine should reach approximately 180 °F within 10 minutes of driving in moderate weather. A coolant temperature that hovers in the 140–160 °F range is the textbook thermostat-stuck-open fingerprint.

    Tools: Scan tool with ECT graphing

  2. Verify the ECT sensor agrees with reality

    Point an infrared thermometer at the cylinder head or upper radiator hose. Compare to the scan tool reading. Disagreement of more than 15 °F means the sensor is reading wrong — a bad sensor will set P0125 even with a perfect thermostat.

    Tools: Infrared thermometer, Scan tool

  3. Confirm the thermostat opening temperature

    Pull the thermostat (if access permits) and test in a pot of water with a kitchen thermometer — heat the water and watch when the thermostat opens. Should match the stamped rating (typically 195 °F / 90 °C). A thermostat that opens at room temperature is finished.

    Tools: Thermostat removal tools, Cooking thermometer, Pot for testing

  4. Check that the cooling fan is not running prematurely

    Watch the cooling fan on a cold start. A fan that starts running immediately keeps the engine over-cooled. Diagnose that separate fault first — a new thermostat will not fix P0125 if the fan is the real cause.

    Tools: Visual inspection

  5. Inspect the radiator hose temperature pattern

    Cold-start the engine. The upper radiator hose should stay cool for several minutes (thermostat closed) and then warm rapidly. A hose that warms gradually from idle confirms the thermostat is stuck open.

    Tools: Infrared thermometer

NHTSA complaints & recalls for the 2022 Toyota 4Runner

Owner-reported safety complaints and official recalls filed with the U.S. National Highway Traffic Safety Administration for the 2022 Toyota 4Runner. Use these to gauge how common a problem is on your specific vehicle before you start chasing Toyota 4Runner diagnostics.

39 owner complaints
5 involved a crash
1 involved a fire
7 reported injuries
  • UNKNOWN OR OTHER 7
  • SUSPENSION 6
  • AIR BAGS 6
  • FORWARD COLLISION AVOIDANCE 5
  • SERVICE BRAKES 5

3 active recalls

  • EXTERIOR LIGHTING:HEADLIGHTS Dec 2021

    Southeast Toyota Distributors, LLC (SET) is recalling certain 2022 Toyota 4Runner vehicles. The driver's side high beam may be inoperable after the installation of accessory fog lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety…

    NHTSA campaign 21V963000
  • EQUIPMENT:OTHER:LABELS May 2022

    Gulf States Toyota, Inc. (GST) is recalling certain 2022 4Runner, Tacoma, Highlander, and Highlander Hybrid vehicles. The load carrying capacity modification labels may not be permanent and can fade, becoming illegible. As such, these vehicles fail to comply with the requiremen…

    NHTSA campaign 22V310000
  • EQUIPMENT:OTHER:LABELS Jul 2022

    Southeast Toyota Distributors, LLC (SET) is recalling certain 2020-2022 4Runner vehicles equipped with 20-inch Black Gunner Wheels. The load carrying capacity modification labels are incorrect. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicl…

    NHTSA campaign 22V480000

How do I fix P0125 on a 2022 Toyota 4Runner?

About the 2020-2024 Toyota 4Runner

The 2020-2024 Toyota 4Runner was commonly sold with the following powertrains: 4.0L V6. Common trims include SR5, TRD Off-Road, TRD Pro, Limited.

P0125 vs P0128

These two codes are closely related but slightly different:

In practice both usually trace to the same cause (thermostat stuck open), but the threshold and the symptom are different. P0125 sets on engines that miss the closed-loop entry point; P0128 sets on engines that warm up partially but stay under the thermostat’s regulating temperature.

Why P0125 hurts emissions even more than P0128

P0125 means the ECM is running open-loop indefinitely — using a calibrated fuel map rather than O2 feedback. Open-loop fueling is rich-biased for cold-start protection, which:

Fix it within weeks of detection, not months.

When the ECT sensor is the cheap surprise fix

A failing ECT sensor that reads 50 °F low can set P0125 even though the engine is actually reaching normal temperature. Always compare the scan-tool ECT reading to a real infrared thermometer measurement on the engine before replacing the thermostat. A $40 sensor saves $300 in unnecessary thermostat labor.

P0125 on a 2022 Toyota 4Runner: frequently asked questions

What does diagnostic trouble code P0125 mean on a 2022 Toyota 4Runner?

P0125 is set when the engine fails to reach the calibrated closed-loop threshold temperature within a calibrated time and distance. Closed loop fuel control requires the engine to be warm enough that the oxygen sensors are reliable and the ECM can trust their feedback. When coolant never crosses that threshold, the ECM remains in open loop indefinitely and sets P0125 as evidence the engine is not reaching its operating temperature.

What are the symptoms of P0125 on a 2022 Toyota 4Runner?

Check Engine Light is illuminated. Heater output weak or slow to warm up. Temperature gauge sits below normal. Reduced fuel economy. Rough idle when cold (engine stays in cold-start enrichment longer than expected). Cold-start drive cycle takes much longer to complete emissions monitors

What causes P0125 on a 2022 Toyota 4Runner?

Thermostat stuck open or partially open (most-common). Wrong-temperature thermostat installed (common). Failed engine coolant temperature (ECT) sensor reading low (occasional). Cooling fan running continuously due to a separate fault (occasional). Heater core bypass leak letting coolant circulate freely (rare)

Is it safe to drive a 2022 Toyota 4Runner with P0125?

In most cases a 2022 Toyota 4Runner stays drivable for short trips with P0125 active, but it should be diagnosed and repaired promptly — this is a low-severity code. Ignoring it can lead to further damage or a failed emissions test.

Related diagnostic codes

P0125 on other Toyota 4Runner model years