P0507 on a 2017 Chevrolet Malibu

Idle Higher Than Expected

P0507 on a 2017 Chevrolet Malibu indicates idle higher than expected. It usually stays drivable short-term but should be diagnosed promptly. The most common cause is vacuum leak (intake gasket, pcv hose, brake-booster hose, throttle-body gasket) (typically $80–$600). Confirm the root cause before replacing parts.

Severity: moderate Safe to drive (short term) Mid-size Sedan 2015-2019 Chevrolet Malibu

Reviewed by MECH AI Editorial · Last verified

What does P0507 mean on a 2017 Chevrolet Malibu?

P0507 is set when the ECM commands the throttle to a specific idle RPM and measures actual idle higher than that target by more than a calibrated amount (typically 200+ RPM higher). The cause is almost always unmetered air entering the engine — a vacuum leak somewhere — or a stuck throttle body / idle control issue.

This guide covers P0507 across the 2015-2019 Chevrolet Malibu generation — the symptoms, causes, and diagnostic steps below apply to every model year from 2015 through 2019.

Is it safe to drive a 2017 Chevrolet Malibu with P0507?

In most cases a 2017 Chevrolet Malibu stays drivable for short trips with P0507 active, but diagnose and repair it promptly. This is a moderate-severity code — ignoring it can lead to further damage or a failed emissions test.

What are the symptoms of P0507 on a 2017 Chevrolet Malibu?

What causes P0507 on a 2017 Chevrolet Malibu?

Cause Likelihood Estimated repair (USD)
Vacuum leak (intake gasket, PCV hose, brake-booster hose, throttle-body gasket) Most P0507 codes trace to unmetered air entering the engine. Most common $80–$600
Carbon-coked throttle body keeping the blade slightly open Common $20–$200
Failed or sticking idle air control (IAC) valve on older non-ETC vehicles Common $80–$300
Failed throttle body needing replacement and relearn Occasional $250–$800
Sticking accelerator pedal or throttle cable (older vehicles) Occasional $50–$250
Cracked plastic intake manifold Occasional $250–$900
EVAP purge valve stuck open (often sets P0496 alongside) Occasional $80–$300

How to diagnose this on a 2017 Chevrolet Malibu

  1. Confirm the actual idle RPM and check fuel trims

    Scan-tool live data should show actual idle RPM and the target. Look at Bank 1 LTFT: a high positive number (e.g. +15 % or more) confirms a real vacuum leak. Trims near zero with high idle point at a throttle body or EVAP issue rather than a leak.

    Tools: Scan tool with live PIDs

  2. Smoke-test the intake

    Pressurize the intake with smoke through a snorkel cap or the throttle body. Watch every gasket, hose, vacuum tee, the brake booster line, the PCV system, and the EVAP purge line. Smoke escaping anywhere is the leak.

    Tools: EVAP / intake smoke machine, Flashlight and inspection mirror

  3. Inspect and clean the throttle body

    Coked carbon at the throttle bore prevents the blade from closing fully — the engine pulls air around the blade that the ECM cannot fully control. Clean with throttle-body-safe cleaner (never carb cleaner) and a soft brush. Perform an idle relearn after.

    Tools: Throttle body cleaner, Soft brush, Service manual for the relearn procedure

  4. Test the IAC valve (non-ETC vehicles)

    On older vehicles with a separate IAC valve, command the valve with a scan tool and watch for idle changes. A valve that does not respond, or that idles correctly with the connector unplugged, is stuck or failed.

    Tools: Scan tool with IAC command

  5. Verify the EVAP purge valve is not stuck open

    A stuck-open purge valve introduces unmetered fuel vapor at idle, causing high idle and lean trims similar to a vacuum leak. With the engine idling, disconnect the purge valve — if idle smooths out, the purge valve is the cause.

    Tools: Hose disconnect tools

NHTSA complaints & recalls for the 2017 Chevrolet Malibu

Owner-reported safety complaints and official recalls filed with the U.S. National Highway Traffic Safety Administration for the 2017 Chevrolet Malibu. Use these to gauge how common a problem is on your specific vehicle before you start chasing Chevrolet Malibu diagnostics.

714 owner complaints
17 involved a crash
4 involved a fire
16 reported injuries
  • ENGINE 253
  • POWER TRAIN 141
  • VEHICLE SPEED CONTROL 136
  • ELECTRICAL SYSTEM 169
  • UNKNOWN OR OTHER 148

4 active recalls

  • AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION Jun 2018

    General Motors LLC (GM) is recalling certain 2016-2018 Chevrolet Malibu vehicles. During servicing, a Passenger Presence System (PPS) may have been installed that was not correctly calibrated to the vehicle's seat type. As a result, the PPS may not properly identify an adult pa…

    NHTSA campaign 18V400000
  • FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP May 2018

    General Motors LLC (GM) is recalling certain 2015-2018 GMC Canyon, 2016-2017 Buick Envision, 2016-2018 Chevrolet Colorado and Malibu, 2017-2018 GMC Acadia, 2018 Buick LaCrosse, Cadillac ATS, Chevrolet Equinox, and GMC Terrain vehicles. The high pressure fuel pump may detach from…

    NHTSA campaign 18V358000
  • AIR BAGS:SIDE/WINDOW Dec 2016

    General Motors LLC (GM) is recalling certain 2017 Malibu vehicles manufactured on November 10, 2016. The right-hand rear side air bag inflator manifold may have insufficient welds.…

    NHTSA campaign 16V870000
  • SEAT BELTS:CRITICAL FASTENERS Aug 2021

    General Motors, LLC (GM) is recalling certain 2016-2021 Chevrolet Malibu and 2019-2021 Cadillac XT4 vehicles. The rear seat belt retractors may be improperly secured with loose or missing fasteners.…

    NHTSA campaign 21V649000

How do I fix P0507 on a 2017 Chevrolet Malibu?

About the 2015-2019 Chevrolet Malibu

The 2015-2019 Chevrolet Malibu was commonly sold with the following powertrains: 1.5L Turbo I4, 2.0L Turbo I4, 2.5L I4, 1.8L Hybrid I4. Common trims include L, LS, RS, LT, Premier.

The vacuum leak almost certainly is the cause

P0507 paired with P0171 (or P0174) is virtually always a vacuum leak. The high idle and the lean fuel trim both result from the same underlying problem: unmetered air entering the engine downstream of the MAF. The ECM cannot identify exactly which leak path is responsible, only that one exists. Smoke testing is the fastest path to the source.

Common P0507 leak locations by engine

Idle relearn after throttle body cleaning

Modern vehicles with electronic throttle control require an idle relearn after any throttle body removal, cleaning, or replacement. The procedure varies — generally:

  1. Battery disconnect 30+ seconds, reconnect
  2. Key on, engine off, 30 seconds
  3. Start engine, idle 5 minutes with no load (AC off, no electrical accessories)
  4. Drive a short cycle including a few full stops

Some vehicles require a bidirectional scan tool to perform the relearn. Without a successful relearn, P0507 will set again within a few drive cycles even though the throttle body is mechanically perfect.

P0507 on a 2017 Chevrolet Malibu: frequently asked questions

What does diagnostic trouble code P0507 mean on a 2017 Chevrolet Malibu?

P0507 is set when the ECM commands the throttle to a specific idle RPM and measures actual idle higher than that target by more than a calibrated amount (typically 200+ RPM higher). The cause is almost always unmetered air entering the engine — a vacuum leak somewhere — or a stuck throttle body / idle control issue.

What are the symptoms of P0507 on a 2017 Chevrolet Malibu?

Check Engine Light is illuminated. Engine idles noticeably high (1000-1500 RPM instead of 700-900). Possible whistling or hissing sound from the intake area. Reduced fuel economy. Hesitation as the engine tries to slow when stopping. May be paired with P0171 (lean code)

What causes P0507 on a 2017 Chevrolet Malibu?

Vacuum leak (intake gasket, PCV hose, brake-booster hose, throttle-body gasket) (most-common). Carbon-coked throttle body keeping the blade slightly open (common). Failed or sticking idle air control (IAC) valve on older non-ETC vehicles (common). Failed throttle body needing replacement and relearn (occasional). Sticking accelerator pedal or throttle cable (older vehicles) (occasional). Cracked plastic intake manifold (occasional). EVAP purge valve stuck open (often sets P0496 alongside) (occasional)

Is it safe to drive a 2017 Chevrolet Malibu with P0507?

In most cases a 2017 Chevrolet Malibu stays drivable for short trips with P0507 active, but it should be diagnosed and repaired promptly — this is a moderate-severity code. Ignoring it can lead to further damage or a failed emissions test.

Related diagnostic codes

P0507 on other Chevrolet Malibu model years