P0411 on Toyota vehicles
Secondary Air Injection Insufficient Flow — what it means on a Toyota, whether it's safe to drive, and the fixes by model and year.
P0411 on a Toyota means secondary air injection insufficient flow. Most vehicles stay drivable short-term, but diagnose it promptly. The most common cause is failed secondary air injection pump motor (typically $300–$1,200). Pick your Toyota model below for its known failure patterns, recalls, and TSBs.
What does P0411 mean on a Toyota?
P0411 is set when the engine control module commands the secondary air injection (SAI) system to inject air into the exhaust during cold start and does not detect the expected oxygen reading at the upstream O2 sensors. The SAI system is a separate pump that blows fresh air into the exhaust manifold for the first 60–90 seconds after cold start, helping the catalyst light off faster and reducing cold-start emissions. P0411 means that air injection is not happening — usually because the SAI pump, check valve, or control valve has failed.
P0411 is a standardized OBD-II code, so its definition is the same on every Toyota. What differs by model and engine is which cause is most likely — pick your Toyota model below for a diagnosis tuned to its known failure patterns, recalls, and TSBs.
Is it safe to drive a Toyota with P0411?
In most cases a Toyota stays drivable for short trips with P0411 active, but diagnose and repair it promptly. This is a low-severity code — ignoring it can lead to further damage or a failed emissions test. Exact tolerance depends on the model and engine.
What causes P0411 on a Toyota?
| Cause | Likelihood | Estimated repair (USD) |
|---|---|---|
| Failed secondary air injection pump motor — Particularly common on VW, Audi, BMW, Porsche, and Mercedes vehicles. | Most common | $300–$1,200 |
| Stuck or seized SAI combination valve / check valve | Common | $200–$700 |
| SAI vacuum control solenoid failure | Common | $80–$350 |
| Cracked or disconnected SAI hose | Common | $50–$300 |
| Carbon-clogged SAI passages in the exhaust manifold | Occasional | $400–$1,500 |
| Failed SAI relay | Occasional | $30–$150 |
| Wiring fault to the SAI pump or solenoid | Occasional | $80–$350 |
Repair costs are typical US ranges and vary by Toyota model, model year, and labor rate. A diagnostic trouble code is a symptom, not a guaranteed failed part — confirm the root cause before replacing anything.
P0411 by Toyota model
Select your Toyota model and year for a P0411 diagnosis tuned to that vehicle's failure patterns, recalls, and TSBs.
Toyota RAV4
691 NHTSA owner complaints · 9 recalls on record across the years covered below.
Toyota Camry
842 NHTSA owner complaints · 6 recalls on record across the years covered below.
Toyota Corolla
721 NHTSA owner complaints · 8 recalls on record across the years covered below.
Toyota Tacoma
583 NHTSA owner complaints · 15 recalls on record across the years covered below.
Toyota 4Runner
170 NHTSA owner complaints · 16 recalls on record across the years covered below.
Toyota Highlander
650 NHTSA owner complaints · 11 recalls on record across the years covered below.
Toyota Sienna
393 NHTSA owner complaints · 22 recalls on record across the years covered below.
Complaint and recall counts are NHTSA totals for the model years covered on this site, not counts specific to P0411.
P0411 on other makes
Other codes on Toyota vehicles
P0411 on a Toyota: frequently asked questions
What does diagnostic trouble code P0411 mean on a Toyota?
P0411 is set when the engine control module commands the secondary air injection (SAI) system to inject air into the exhaust during cold start and does not detect the expected oxygen reading at the upstream O2 sensors. The SAI system is a separate pump that blows fresh air into the exhaust manifold for the first 60–90 seconds after cold start, helping the catalyst light off faster and reducing cold-start emissions. P0411 means that air injection is not happening — usually because the SAI pump, check valve, or control valve has failed. P0411 is a standardized OBD-II code, so the definition is the same on every Toyota — which cause is most likely varies by model and engine.
What are the symptoms of P0411 on a Toyota?
Check Engine Light is illuminated. Whirring sound from the SAI pump during cold start (or absence of one). Slightly elevated cold-start emissions. Vehicle will fail emissions / smog testing. No noticeable drivability symptoms once warm
What causes P0411 on a Toyota?
Failed secondary air injection pump motor (most-common). Stuck or seized SAI combination valve / check valve (common). SAI vacuum control solenoid failure (common). Cracked or disconnected SAI hose (common). Carbon-clogged SAI passages in the exhaust manifold (occasional). Failed SAI relay (occasional). Wiring fault to the SAI pump or solenoid (occasional)
Is it safe to drive a Toyota with P0411?
In most cases a Toyota stays drivable for short trips with P0411 active, but it should be diagnosed and repaired promptly — this is a low-severity code. Ignoring it can lead to further damage or a failed emissions test. Exact tolerance depends on the model and engine.