P0335 on Honda vehicles

Honda describes P0335 as a missing crankshaft position signal. The model, engine and any companion codes help a technician choose the right test.

Severity: critical Do not drive 6 Honda models covered

Maintained by MECH AI Editorial · Technical content updated

Does Honda bulletin 16-011 apply?

Honda lists 2013–15 four-cylinder non-hybrid Accords and the 2015 CR-V. Certain 2016 Accords and CR-Vs also qualify. Check the bulletin’s VIN table for your body style or drivetrain.

For a listed vehicle, tell the technician whether the scan also showed P0339. Honda identifies corrosion at the crankshaft sensor harness connector as a possible cause. Ask whether the connector and harness were checked before buying a sensor.

Honda service bulletin 16-011 (PDF)

Is it safe to drive a Honda with P0335?

No. P0335 is a critical-severity code — avoid driving your Honda until it is diagnosed and repaired, as it can indicate an unsafe condition or risk further damage.

For other possible causes and diagnostic steps, see the general P0335 guide.

P0335 by Honda model

Choose a Honda model and year to open its guide. Each guide covers a representative model year. Check the bulletin separately for your exact vehicle.

Honda CR-V

Honda Civic

Honda Accord

Honda Pilot

Honda HR-V

Honda Odyssey

Complaint and recall counts are NHTSA totals for the model years covered on this site, not counts specific to P0335.

P0335 on other makes

Other codes on Honda vehicles