P0014 on a 2022 Honda Pilot

Exhaust Cam Over-Advanced (Bank 1, VVT)

P0014 on a 2022 Honda Pilot indicates exhaust cam over-advanced (bank 1, vvt). It usually stays drivable short-term but should be diagnosed promptly. The most common cause is stuck or sludged exhaust-side vvt oil control valve (typically $100–$450). Confirm the root cause before replacing parts.

Severity: high Safe to drive (short term) Mid-size SUV 2020-2024 Honda Pilot

Reviewed by MECH AI Editorial · Last verified

What does P0014 mean on a 2022 Honda Pilot?

P0014 is set when the engine control module commands the Bank 1 exhaust camshaft to a specific advance position and the actual cam position does not match within tolerance. On engines with dual-cam VVT (intake + exhaust phasers), P0014 is the exhaust-side counterpart of P0011. The cause is almost always the same family of failures: a stuck oil control valve, dirty oil starving the phaser, or the phaser itself failing.

This guide covers P0014 across the 2020-2024 Honda Pilot generation — the symptoms, causes, and diagnostic steps below apply to every model year from 2020 through 2024.

Is it safe to drive a 2022 Honda Pilot with P0014?

In most cases a 2022 Honda Pilot stays drivable for short trips with P0014 active, but diagnose and repair it promptly. This is a high-severity code — ignoring it can lead to further damage or a failed emissions test.

What are the symptoms of P0014 on a 2022 Honda Pilot?

What causes P0014 on a 2022 Honda Pilot?

Cause Likelihood Estimated repair (USD)
Stuck or sludged exhaust-side VVT oil control valve Most common $100–$450
Low engine oil level or pressure starving the exhaust cam phaser Most common $50–$200
Sludged oil passages from skipped maintenance Common $100–$600
Failed exhaust cam phaser / VVT actuator Common $600–$1,800
Stretched timing chain affecting exhaust cam position Occasional $800–$3,000
Damaged exhaust cam sensor wiring or connector Occasional $80–$350

How to diagnose this on a 2022 Honda Pilot

  1. Confirm oil level, condition, and pressure first

    VVT systems are oil-powered. Verify level is at full on a level surface with a warm engine, oil is clean (not dark or sludgy), and viscosity matches the OEM spec. Measure oil pressure with a mechanical gauge — typical 15–25 psi at idle, 40–60 psi at 2500 RPM. Low pressure must be fixed before chasing VVT parts.

    Tools: Mechanical oil pressure gauge, Dipstick / level check

  2. Read live exhaust cam position vs. commanded position

    Scan-tool live data shows commanded and actual cam position. Watch while bidirectionally commanding cam advance. A working system tracks within 1–2 degrees of command. Lag of 5 degrees or oscillation points at the actuator or oil control valve.

    Tools: Bidirectional scan tool with cam position PIDs

  3. Inspect and clean the exhaust-side oil control valve

    Remove the exhaust-side OCV. Check the inlet screen for sludge or metal debris. Bench-test with 12 V — the valve should click and open. Air should pass freely when energized and seal when de-energized. A sticking valve causes the most common P0014.

    Tools: Socket set, Brake cleaner (NOT MAF-safe), 12 V test source, Compressed air

  4. Listen for cam phaser noise at startup

    A failing exhaust phaser often rattles at cold start for 1–3 seconds. Use a mechanic's stethoscope at the front of the cylinder head. The noise stops as oil pressure builds. Continuous rattle indicates advanced phaser wear.

    Tools: Mechanic's stethoscope

  5. Verify timing chain integrity (specific engines)

    On engines with documented chain wear (BMW N20/N26, Ford 5.4 3V, VW EA888, GM 3.6 LFX), the phaser cannot fully advance once the chain has stretched — P0014 sets even with a perfect phaser. Check live cam-crank correlation drift under load.

    Tools: Scan tool with cam-crank correlation

NHTSA complaints & recalls for the 2022 Honda Pilot

Owner-reported safety complaints and official recalls filed with the U.S. National Highway Traffic Safety Administration for the 2022 Honda Pilot. Use these to gauge how common a problem is on your specific vehicle before you start chasing Honda Pilot diagnostics.

121 owner complaints
5 involved a crash
3 reported injuries
  • ENGINE 21
  • POWER TRAIN 12
  • FORWARD COLLISION AVOIDANCE 33
  • UNKNOWN OR OTHER 27
  • ELECTRICAL SYSTEM 26

4 active recalls

  • BACK OVER PREVENTION:DISPLAY FUNCTION Jun 2023

    Honda (American Honda Motor Co.) is recalling certain 2018-2023 Odyssey, 2019-2022 Pilot, and 2019-2023 Passport vehicles. Due to a faulty Media Oriented Systems Transport (MOST) communication coaxial cable connector, the rearview camera image may not appear on the display. As…

    NHTSA campaign 23V431000
  • SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER Jun 2023

    Honda (American Honda Motor Co.) is recalling certain 2020-2021 Civic, 2020-2023 Ridgeline, 2021-2023 Passport, 2021-2022 Pilot, and 2020 Acura MDX vehicles. The tie rod fastener that connects the brake booster and the brake master cylinder may have been improperly assembled dur…

    NHTSA campaign 23V458000
  • AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION:FRONT PASSENGER Feb 2024

    Honda (American Honda Motor Co.) is recalling certain 2020-2022 Pilot, Accord, Civic sedan, HR-V, Odyssey, 2020 Civic coupe, Fit, 2021-2022 Civic hatchback, 2021 Civic Type R, Insight, 2020-2021 CR-V, CR-V Hybrid, Passport, Ridgeline, Accord Hybrid, 2020 Acura MDX, 2022 Acura MDX…

    NHTSA campaign 24V064000
  • AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION:FRONT PASSENGER May 2026

    Honda (American Honda Motor Co.) is recalling certain 2018-2021, 2023 Acura TLX, 2019-2024 RDX, 2017-2020, 2022-2026 MDX, 2017-2021, 2023, 2025 Honda Ridgeline, 2017-2022 Pilot, 2019-2021 Passport, 2018-2026 Odyssey, 2019-2022 Insight, 2019-2021 HR-V, 2018-2020 Fit, 2020-2022 CR-…

    NHTSA campaign 26V332000

How do I fix P0014 on a 2022 Honda Pilot?

About the 2020-2024 Honda Pilot

The 2020-2024 Honda Pilot was commonly sold with the following powertrains: 3.5L V6. Common trims include LX, EX, EX-L, Touring, Elite, TrailSport.

P0014 vs P0011

These two codes describe the same kind of fault on different camshafts:

Engines with dual VVT have separate phasers and separate oil control valves for intake and exhaust. P0011 and P0014 setting together points to a common cause (oil pressure, sludge, common chain issue). P0014 alone isolates to the exhaust-side hardware.

Why oil maintenance matters more than the phaser itself

Most P0014 cases on engines with under 100,000 miles trace back to oil maintenance: extended intervals, wrong viscosity, or a slow oil leak that drops level over time. The cam phaser is mechanically robust if fed clean, high-pressure oil. A $50 oil change has resolved more P0014 codes than any other single repair.

Engines that disproportionately set P0014

Related diagnostic codes